marka model piston sizes

home ⇒ equipment ⇒ piston

Below is data on piston parameters for modifications of cars of different years of manufacture.

Main piston parameters:

Piston parameters include more than 15 sizes, the main ones are as follows:

  • Diameter: nominal piston diameter;
  • Height: piston height;
  • Compression height;
  • Groove height: first and second ring groove height;
  • Oil control ring groove height;
  • Cylinder gap: acceptable gap between cylinder and piston ring;
  • Piston pin diameter;
  • Ring height.
Note:

When piston is worn out, the gap between skirt and cylinder, piston upper groove erasing, skirt scoring, cracks and deformation of partitions between rings may occur.

Important: item parameters and sizes of different manufacturers can slightly differ.

Piston - full drawing
General Bristol piston parameters
General view spravka
General view

Models spravka
Total number of models presented

Modifications spravka
Total number of all modifications of marka for parameter Piston stroke presented in our database

Dimensions piston

(General view)		310
Piston stroke for major modifications
Modification spravka
Engine modification or design feature

Piston stroke spravka
Piston stroke for modification.

Data is given in (mm)
Series 1 5.9 AT (1993 - 1997) 90.93 (mm)
Series 2 5.9 AT (1997 - 2000) 90.93 (mm)
Series 3 5.9 AT (2000 - 2011) 90.93 (mm)
Series 3 5.9 AT (2002 - 2011) 90.93 (mm)
Speedster 5.9 AT (2003 - 2011) 90.93 (mm)
5.9 AT (2003-2020) 90 (mm)
8.0 AT (2004 - 2011) 98.6 (mm)
8.0 MT (2004 - 2011) 98.6 (mm)
S 8.0 MT (2004 - 2011) 98.6 (mm)
T 8.0 MT (2004 - 2011) 98.6 (mm)

Warning: the above data are official figures of the manufacturers, however, it should be borne in mind that the information is for reference and does not guarantee unambiguous accuracy.


0 Comments