Scania piston sizes - Size charts

marka model piston sizes

Below is data on piston parameters for modifications of cars of different years of manufacture.

Main piston parameters:

Piston parameters include more than 15 sizes, the main ones are as follows:

Diameter: nominal piston diameter;
Height: piston height;
Compression height;
Groove height: first and second ring groove height;
Oil control ring groove height;
Cylinder gap: acceptable gap between cylinder and piston ring;
Piston pin diameter;
Ring height.

Note:

When piston is worn out, the gap between skirt and cylinder, piston upper groove erasing, skirt scoring, cracks and deformation of partitions between rings may occur.

Important: item parameters and sizes of different manufacturers can slightly differ.

Piston - full drawing

General Scania L-series piston parameters

General view General view	Piston stroke min Piston stroke min Minimum value of parameter Piston stroke for all marka model modifications. Data is given in (mm).	Piston stroke max Piston stroke max Maximum value of parameter Piston stroke for all marka model modifications. Data is given in (mm).	Modifications Total number of all marka model modifications presented in our database
(General view)			8

marka model piston parameters

Parameter Piston parameter Data is given for cars of various modifications and years of manufacture	Value Piston value Data is given for cars of various modifications and years of manufacture
110 02.1968→12.1974 D 11 D
Engine brand	D 11
110 02.1968→12.1974 DS 11 D
Engine brand	DS 11
140 03.1972→04.1980 DS 14 D
Engine brand	DS 14
140 08.1975→08.1978 DS 14 LB 05 D
Engine brand	DS 14 LB 05
80 02.1968→04.1975 D 8 D
Engine brand	D 8
81 05.1975→04.1980 D 8 D
Engine brand	D 8
85 02.1968→04.1975 D 8 D
Engine brand	D 8
86 05.1975→04.1980 D 8 D
Engine brand	D 8

Warning: the above data are official figures of the manufacturers, however, it should be borne in mind that the information is for reference and does not guarantee unambiguous accuracy.

0 Comments