Alpina A108 tires sizes

home ⇒ equipment ⇒ tires ⇒ alpina

Minimum tire width for the entire range of models is: 125-135 (mm).

General parameters:
  • Tire width without load (B): from 125-135 to 345-364;
  • Diameter (D): from 487-495 to 970-977;
  • Outer circumference (L): from 1541 to 3070;
  • Tire profile or height (H): from 58 to 518.
Possible tire sizes for Alpina A108:
Additional Information:

To determine the height of tire profile (H), measure the difference between the outer and inner diameter of the tire (the actual height of the profile) and divide it by the distance between the outer edges of the rubber.

Important: when determining the tire width (B) elevations due to additional belts, letters, contours and tire upholstery are not taken into account, in general, this parameter must not exceed the width of the wheel rim by more than 30%.

Possible tire parameters for Alpina A108 of different years of manufacture and modifications
General view spravka
General view

Tire spravka
Possible tire sizes for Alpina A108 of different years of manufacture and modifications

Disk spravka
Possible disk sizes for Alpina A108 of different years of manufacture and modifications

Wheel spravka
Possible wheel sizes for Alpina A108 of different years of manufacture and modifications

Dimensions tires

(General view)
Table of tire sizes of Alpina A108
Year spravka
Year of production

Size spravka
Tire size in format:

1. Width of work face.

2. Percentage of profile height from width.

3. R is type of construction (radial) - inner diameter (in inches).

spravka

B (mm) spravka
Tire width:

1. Nominal tire width (excluding protective belt).

2. Maximum width during operation.

spravka

D (mm) spravka
Tire diameter:

1. Nominal size of outer diameter (2xR) of the tire.

2. Maximum size during operation.

spravka

L (mm) spravka
Tire circumference in (mm)

H (mm) spravka
Tire profile:

Tire profile (height) for models of different years of manufacture.

spravka
0.8
0.9

Warning: the above data are official figures of the manufacturers, however, it should be borne in mind that the information is for reference and does not guarantee unambiguous accuracy.


0 Comments