marka tires sizes

Minimum tire size for the entire range of FSO models is: 185/60R14.

Limit parameters for all models:

  • Tire sizes: from 185/60R14 to 185/60R14;
  • Disc sizes: from 14x6.0 to 14x6.0.

Tire marking:

In general, the standard European tire marking is a record in the form 175/65R15, where:

  • 175 is width of the work face of the tire;
  • 65 is percentage of profile height from tire width;
  • R15 is type of construction (R - radial) and inner diameter (in inches).

The American tire marking is similar to the European , but the size is preceded by P (for a motor (passenger) car) or LT (for a light truck).

If the height of rubber is 55% or less than its width, then the tire is considered low profile.

Important: the higher the proportionality of the tire (the ratio of the height of the profile to the width), the higher the tire, and vice versa: the lower the proportionality of the tire, the lower the tire.

Dimensions wheels FSO Dimensions wheel disks FSO

Possible sizes for all FSO models
General view spravkaGeneral view tires Tires max spravka
Maximum tire sizes for FSO

Wheel disks spravka
Possible disk sizes for FSO of different years of manufacture and modifications

Wheels spravka
Possible wheel sizes for FSO of different years of manufacture and modifications

Dimensions tires FSO 185/60R14 min
(General view)
General tire parameters for all FSO models
General view spravka
Tire size in format:

1. Width of work face.

2. Percentage of profile height from width.

3. R is type of construction (radial) - inner diameter (in inches).

B (mm) spravka
Tire width:

1. Nominal tire width (excluding protective belt).

2. Maximum width during operation.

D (mm) spravka
Tire diameter:

1. Nominal size of outer diameter (2xR) of the tire.

2. Maximum size during operation.

L (mm) spravka
Tire circumference in (mm)

H (mm) spravka
Tire profile:

Tire profile (height) for models of different years of manufacture

185/60R14 185-197 578-586 1763 111

Warning: the above data are official figures of the manufacturers, however, it should be borne in mind that the information is for reference and does not guarantee unambiguous accuracy.