Disc sizes of AC
 Limit parameters for all models: Tire size: -;Disk size: -. Possible disk sizes for AC (АС): Important: main parameters of a vehicle wheel: width (B), diameter (D), diameter of circumference of the mounting holes (PCD), disk offset (ET), diameter of a center hole (DIA). Formula for calculating the disk offset: The distance between mating face of the wheel (the face with which the disk is pressed against the hub) and the middle of the width of disk is called disk offset (ET), the offset is calculated using the following formula:ET = A - B/2, where:A is the distance between the inner face of the disk and the part in contact with the hub;B is disk width.There are discs with a negative offset and a positive offset, if the middle of the disc matches the face of attachment of the disc to the hub, then the disc offset will be zero.Important: the main parameters of vehicle wheel discs have the following units: width (inches), diameter (inches), diameter of circumference of the mounting holes (mm), disk offset (mm), diameter of a center hole (mm).
Wheel disks - full drawing
General parameters of AC discs
General view
General view

Disk
Possible disk sizes for AC of different years of manufacture and modifications

Wheel
Possible wheel sizes for AC of different years of manufacture and modifications

Tire
Maximum tire sizes for AC of different years of manufacture and modifications

(General view)
--
General parameters of discs for all AC models
Size
Disk size in format:

1. D - diameter of the disk in inches.

3. B - disk width in inches.

D (in)
Disk diameter in (in):

Nominal size of outer diameter (2xR) of the disk in inches.

D (cm)
Disc diameter in (cm):

Nominal size of outer diameter (2xR) of the disc in centimeters.

B (in)
Disk width in (in):

Nominal disk width (excluding the protective belt) in inches.

B (cm)
Disk width in (cm):

Nominal disk width (excluding the protective belt) in centimeters.

Wheel disks AC by models: