 Dimensions cars Audi V8
 Dimensions wheels Audi V8
 Dimensions wheel disks Audi V8
 Dimensions tires Audi V8
 Dimensions car bodies Audi V8
 Dimensions wipers Audi V8
 Dimensions batteries Audi V8
 Dimensions wheel fastener Audi V8
 Dimensions rear windshield Audi V8
 Dimensions piston Audi V8
 Dimensions fuel tank Audi V8
 Dimensions seat Audi V8
home ⇒ equipment ⇒ wheel disks ⇒ audi
General parameters: 
Important: wheel disc parameter PCD indicates not only the diameter of circumference of the mounting holes, but also the number of mounting bolts or nuts (for example: 5x120, where 120 (mm) is the diameter of centers of the mounting holes, and 5 is the number of mounting bolts). 
Possible disk sizes for Audi V8: 

Procedure for calculating the disc offset: 
The distance between mating face of the wheel (the face with which the disk is pressed against the hub) and the middle of the width of disk is called disk offset (ET). The disk offset affects the width of the vehicle wheelbase, since the distance between the centers of symmetry (in width) of wheels on one axis directly depends on this parameter. Important: PCD of disks with four fixing bolts (or nuts) corresponds to the distance between the centers of opposite bolts (or nuts), PCD of disks with five fixing bolts (or nuts) corresponds to the distance between the centers of any nonadjacent bolts (or nuts) multiplied by the coefficient 1.051. 
General view General view  Disk Possible disk sizes for Audi V8 of different years of manufacture and modifications  Wheel Possible wheel sizes for Audi V8 of different years of manufacture and modifications  ET (mm) Disk offset Distance between the vertical plane of symmetry of the wheel and the plane of contact of the disk to the hub. Measured in millimeters (mm) 

(General view)  15''  15x7.5  45 
Year Model year of manufacture  Size Disk size in format: 1. D  diameter of the disk in inches. 2. x  a sign indicating the inseparability of the disk. 3. B  disk width in inches.  ET (mm) Disc offset: Distance between the vertical plane of symmetry of the wheel and the plane of contact of the disc to the hub.  PCD (mm) Disc drilling: 1. Number of bolt holes. 2. Diameter of the circle on which the mounting holes are located.  Tire Tire size in format: 1. Width of the work face. 2. Percentage of profile height to width. 3. R  type of construction (radial)  inner diameter (in inches).  DIA (mm) Center hole: Diameter of center hole, another marking is CH. 

Audi V8 3.6L  
1988  15x7.5  45  x  215/60R15  x 
1989  15x7.5  45  x  215/60R15  x 
1990  15x7.5  45  x  215/60R15  x 
1991  15x7.5  45  x  215/60R15  x 
1992  15x7.5  45  x  215/60R15  x 
1993  15x7.5  45  x  215/60R15  x 
1994  15x7.5  45  x  215/60R15  x 