Disc sizes of Autobianchi Y10

home ⇒ equipment ⇒ wheel disks ⇒ autobianchi

The number of disk modifications for the Y10 is: (pcs).

General parameters:

Offset (ET): 35;
Drilling (PCD): -;
Center hole (DIA): -.

Important: wheel disc parameter PCD indicates not only the diameter of circumference of the mounting holes, but also the number of mounting bolts or nuts (for example: 5x120, where 120 (mm) is the diameter of centers of the mounting holes, and 5 is the number of mounting bolts).

Possible disk sizes for Autobianchi Y10:

13x5.0

Procedure for calculating the disc offset:

The distance between mating face of the wheel (the face with which the disk is pressed against the hub) and the middle of the width of disk is called disk offset (ET).

The formula for calculating:

ET = A - B/2, where:

A is the distance between the inner plane of disk and the part in contact with the hub;

B is disk width.

The disk offset affects the width of the vehicle wheelbase, since the distance between the centers of symmetry (in width) of wheels on one axis directly depends on this parameter.

Important: PCD of disks with four fixing bolts (or nuts) corresponds to the distance between the centers of opposite bolts (or nuts), PCD of disks with five fixing bolts (or nuts) corresponds to the distance between the centers of any non-adjacent bolts (or nuts) multiplied by the coefficient 1.051.

Wheel disks - full drawing

Possible disk parameters for Autobianchi Y10

General view General view	Disk Possible disk sizes for Autobianchi Y10 of different years of manufacture and modifications	Wheel Possible wheel sizes for Autobianchi Y10 of different years of manufacture and modifications	ET (mm) Disk offset Distance between the vertical plane of symmetry of the wheel and the plane of contact of the disk to the hub. Measured in millimeters (mm)
(General view)	13''	13x5.0	35

Table of disc sizes of Autobianchi Y10 modifications

Year Model year of manufacture	Size Disk size in format: 1. D - diameter of the disk in inches. 2. x - a sign indicating the inseparability of the disk. 3. B - disk width in inches.	ET (mm) Disc offset: Distance between the vertical plane of symmetry of the wheel and the plane of contact of the disc to the hub.	PCD (mm) Disc drilling: 1. Number of bolt holes. 2. Diameter of the circle on which the mounting holes are located.	Tire Tire size in format: 1. Width of the work face. 2. Percentage of profile height to width. 3. R - type of construction (radial) - inner diameter (in inches).	DIA (mm) Center hole: Diameter of center hole, another marking is CH.
Lancia Y10 1.1L
1985	13x5.0	35	x	155/70R13	x
1986	13x5.0	35	x	155/70R13	x
1987	13x5.0	35	x	155/70R13	x
1988	13x5.0	35	x	155/70R13	x
1989	13x5.0	35	x	155/70R13	x
1990	13x5.0	35	x	155/70R13	x
1991	13x5.0	35	x	155/70R13	x
1992	13x5.0	35	x	155/70R13	x
1993	13x5.0	35	x	155/70R13	x
1994	13x5.0	35	x	155/70R13	x
Lancia Y10 1.3L
1985	13x5.0	35	x	155/70R13	x
1986	13x5.0	35	x	155/70R13	x
1987	13x5.0	35	x	155/70R13	x
1988	13x5.0	35	x	155/70R13	x
1989	13x5.0	35	x	155/70R13	x
1990	13x5.0	35	x	155/70R13	x
1991	13x5.0	35	x	155/70R13	x
1992	13x5.0	35	x	155/70R13	x
1993	13x5.0	35	x	155/70R13	x
1994	13x5.0	35	x	155/70R13	x

Warning: despite the fact that the data are official figures of manufacturers, the above information is for reference only and does not guarantee unambiguous accuracy.

Other parameters Autobianchi Y10:

0 Comments