Disc sizes of Datsun GO

home ⇒ equipment ⇒ wheel disks ⇒ datsun

The number of disk modifications for the GO is: (pcs).

General parameters:
  • Offset (ET): -;
  • Drilling (PCD): 4x100;
  • Center hole (DIA): -.

Important: wheel disc parameter PCD indicates not only the diameter of circumference of the mounting holes, but also the number of mounting bolts or nuts (for example: 5x120, where 120 (mm) is the diameter of centers of the mounting holes, and 5 is the number of mounting bolts).
Possible disk sizes for Datsun GO:
    Procedure for calculating the disc offset:

    The distance between mating face of the wheel (the face with which the disk is pressed against the hub) and the middle of the width of disk is called disk offset (ET).

    The formula for calculating:

    ET = A - B/2, where:

    A is the distance between the inner plane of disk and the part in contact with the hub;

    B is disk width.

    The disk offset affects the width of the vehicle wheelbase, since the distance between the centers of symmetry (in width) of wheels on one axis directly depends on this parameter.

    Important: PCD of disks with four fixing bolts (or nuts) corresponds to the distance between the centers of opposite bolts (or nuts), PCD of disks with five fixing bolts (or nuts) corresponds to the distance between the centers of any non-adjacent bolts (or nuts) multiplied by the coefficient 1.051.

    Wheel disks - full drawing
    Possible disk parameters for Datsun GO
    General view spravka
    General view

    		Disk spravka
    Possible disk sizes for Datsun GO of different years of manufacture and modifications

    		Wheel spravka
    Possible wheel sizes for Datsun GO of different years of manufacture and modifications

    		ET (mm) spravka
    Disk offset

    Distance between the vertical plane of symmetry of the wheel and the plane of contact of the disk to the hub.

    Measured in millimeters (mm)

    Dimensions wheel disks

    (General view)    		13''
    		-
    Table of disc sizes of Datsun GO modifications
    Year spravka
    Model year of manufacture

    		Size spravka
    Disk size in format:

    1. D - diameter of the disk in inches.

    2. x - a sign indicating the inseparability of the disk.

    3. B - disk width in inches.

    spravka

    		ET (mm) spravka
    Disc offset:

    Distance between the vertical plane of symmetry of the wheel and the plane of contact of the disc to the hub.

    spravka

    		PCD (mm) spravka
    Disc drilling:

    1. Number of bolt holes.

    2. Diameter of the circle on which the mounting holes are located.

    spravka

    		Tire spravka
    Tire size in format:

    1. Width of the work face.

    2. Percentage of profile height to width.

    3. R - type of construction (radial) - inner diameter (in inches).

    spravka

    		DIA (mm) spravka
    Center hole:

    Diameter of center hole, another marking is CH.

    spravka
    1.2i
    2018xx4x100155/70R13x
    2017xx4x100155/70R13x
    2016xx4x100155/70R13x
    2015xx4x100155/70R13x
    2014xx4x100155/70R13x

    Warning: despite the fact that the data are official figures of manufacturers, the above information is for reference only and does not guarantee unambiguous accuracy.


    0 Comments