Disc sizes of Honda Avancier
 General parameters: Offset (ET): from 45 to 55;Drilling (PCD): 5x114.3;Center hole (DIA): -.Important: wheel disc parameter PCD indicates not only the diameter of circumference of the mounting holes, but also the number of mounting bolts or nuts (for example: 5x120, where 120 (mm) is the diameter of centers of the mounting holes, and 5 is the number of mounting bolts). Possible disk sizes for Honda Avancier: 15x6.515x7.015x6.016x6.5 Procedure for calculating the disc offset: The distance between mating face of the wheel (the face with which the disk is pressed against the hub) and the middle of the width of disk is called disk offset (ET).The formula for calculating:ET = A - B/2, where:A is the distance between the inner plane of disk and the part in contact with the hub;B is disk width.The disk offset affects the width of the vehicle wheelbase, since the distance between the centers of symmetry (in width) of wheels on one axis directly depends on this parameter.Important: PCD of disks with four fixing bolts (or nuts) corresponds to the distance between the centers of opposite bolts (or nuts), PCD of disks with five fixing bolts (or nuts) corresponds to the distance between the centers of any non-adjacent bolts (or nuts) multiplied by the coefficient 1.051.
Wheel disks - full drawing
Possible disk parameters for Honda Avancier
General view
General view

Disk
Possible disk sizes for Honda Avancier of different years of manufacture and modifications

Wheel
Possible wheel sizes for Honda Avancier of different years of manufacture and modifications

ET (mm)
Disk offset

Distance between the vertical plane of symmetry of the wheel and the plane of contact of the disk to the hub.

Measured in millimeters (mm)

(General view)
15''
16''
15x6.5
15x7.0
15x6.0
16x6.5
from 45 to 55
Table of disc sizes of Honda Avancier modifications
Year
Model year of manufacture

Size
Disk size in format:

1. D - diameter of the disk in inches.

3. B - disk width in inches.

ET (mm)
Disc offset:

Distance between the vertical plane of symmetry of the wheel and the plane of contact of the disc to the hub.

PCD (mm)
Disc drilling:

1. Number of bolt holes.

2. Diameter of the circle on which the mounting holes are located.

Tire
Tire size in format:

1. Width of the work face.

2. Percentage of profile height to width.

3. R - type of construction (radial) - inner diameter (in inches).

DIA (mm)
Center hole:

Diameter of center hole, another marking is CH.

Honda Avancier 2.3L
199915x6.545x195/65R15x
200015x6.545x195/65R15x
200115x6.545x195/65R15x
200215x6.545x195/65R15x
200315x6.545x195/65R15x
200415x6.545x195/65R15x
200515x6.545x195/65R15x
Honda Avancier 3.0L
200215x7.045x215/65R15x
200315x7.045x215/65R15x
200415x7.045x215/65R15x
200515x7.045x215/65R15x
Honda Avancier TA1
199915x6.0555x114.3195/65R15x
200115x6.0555x114.3195/65R15x
200116x6.5505x114.3205/55R16x
Honda Avancier TA2
199916x6.5555x114.3215/65R16x
Honda Avancier TA3
199915x6.0555x114.3205/65R15x
Honda Avancier TA4
199916x6.5555x114.3215/65R16x