Disc sizes of Infiniti FX
 General parameters: Offset (ET): from 40 to 50;Drilling (PCD): 5x114.3;Center hole (DIA): -.Important: wheel disc parameter PCD indicates not only the diameter of circumference of the mounting holes, but also the number of mounting bolts or nuts (for example: 5x120, where 120 (mm) is the diameter of centers of the mounting holes, and 5 is the number of mounting bolts). Possible disk sizes for Infiniti FX: 18x8.020x8.020x8.5 Procedure for calculating the disc offset: The distance between mating face of the wheel (the face with which the disk is pressed against the hub) and the middle of the width of disk is called disk offset (ET).The formula for calculating:ET = A - B/2, where:A is the distance between the inner plane of disk and the part in contact with the hub;B is disk width.The disk offset affects the width of the vehicle wheelbase, since the distance between the centers of symmetry (in width) of wheels on one axis directly depends on this parameter.Important: PCD of disks with four fixing bolts (or nuts) corresponds to the distance between the centers of opposite bolts (or nuts), PCD of disks with five fixing bolts (or nuts) corresponds to the distance between the centers of any non-adjacent bolts (or nuts) multiplied by the coefficient 1.051.
Wheel disks - full drawing
Possible disk parameters for Infiniti FX
General view
General view

Disk
Possible disk sizes for Infiniti FX of different years of manufacture and modifications

Wheel
Possible wheel sizes for Infiniti FX of different years of manufacture and modifications

ET (mm)
Disk offset

Distance between the vertical plane of symmetry of the wheel and the plane of contact of the disk to the hub.

Measured in millimeters (mm)

(General view)
18''
20''
18x8.0
20x8.0
20x8.5
from 40 to 50
Table of disc sizes of Infiniti FX modifications
Year
Model year of manufacture

Size
Disk size in format:

1. D - diameter of the disk in inches.

3. B - disk width in inches.

ET (mm)
Disc offset:

Distance between the vertical plane of symmetry of the wheel and the plane of contact of the disc to the hub.

PCD (mm)
Disc drilling:

1. Number of bolt holes.

2. Diameter of the circle on which the mounting holes are located.

Tire
Tire size in format:

1. Width of the work face.

2. Percentage of profile height to width.

3. R - type of construction (radial) - inner diameter (in inches).

DIA (mm)
Center hole:

Diameter of center hole, another marking is CH.

Infiniti FX 30d
201018x8.0505x114.3265/60R18x
201118x8.0505x114.3265/60R18x
201218x8.0505x114.3265/60R18x
201318x8.0505x114.3265/60R18x
Infiniti FX 35
200318x8.0405x114.3265/60R18x
200418x8.0405x114.3265/60R18x
200518x8.0405x114.3265/60R18x
200618x8.0405x114.3265/60R18x
200718x8.0405x114.3265/60R18x
200818x8.0405x114.3265/60R18x
200918x8.0405x114.3265/60R18x
201018x8.0405x114.3265/60R18x
201118x8.0405x114.3265/60R18x
201218x8.0405x114.3265/60R18x
201318x8.0405x114.3265/60R18x
Infiniti FX 37
200820x8.0505x114.3285/35R20x
200820x8.0505x114.3265/50R20x
200920x8.0505x114.3265/50R20x
200920x8.0505x114.3285/35R20x
201020x8.0505x114.3265/50R20x
201020x8.0505x114.3285/35R20x
201120x8.0505x114.3265/50R20x
201120x8.0505x114.3285/35R20x
201220x8.0505x114.3265/50R20x
201220x8.0505x114.3285/35R20x
201320x8.0505x114.3285/35R20x
201320x8.0505x114.3265/50R20x
Infiniti FX 45
200318x8.0405x114.3265/60R18x
200418x8.0405x114.3265/60R18x
200518x8.0405x114.3265/60R18x
200618x8.0405x114.3265/60R18x
200718x8.0405x114.3265/60R18x
200818x8.0405x114.3265/60R18x
Infiniti FX 50
200820x8.5405x114.3265/50R20x
200920x8.5405x114.3265/50R20x
201020x8.5405x114.3265/50R20x
201120x8.5405x114.3265/50R20x
201220x8.5405x114.3265/50R20x
201320x8.5405x114.3265/50R20x