Disc sizes of Isuzu Gemini

The number of disk modifications for the Gemini is: 2 (pcs).

General parameters:

  • Offset (ET): 45 (mm);
  • Drilling (PCD): 4x100 (mm);
  • Center hole (DIA): -.

Important: wheel disc parameter PCD indicates not only the diameter of circumference of the mounting holes, but also the number of mounting bolts or nuts (for example: 5x120, where 120 (mm) is the diameter of centers of the mounting holes, and 5 is the number of mounting bolts).

Possible disk sizes for Isuzu model:

  • Wheel disks 14x5.0: D 14'' (35.6), B 5.0'' (12.7);
  • Wheel disks 13x5.0: D 13'' (33), B 5.0'' (12.7).

Procedure for calculating the disc offset:

The distance between mating face of the wheel (the face with which the disk is pressed against the hub) and the middle of the width of disk is called disk offset (ET).

The formula for calculating:

ET = A - B/2, where:

A is the distance between the inner plane of disk and the part in contact with the hub;

B is disk width.

The disk offset affects the width of the vehicle wheelbase, since the distance between the centers of symmetry (in width) of wheels on one axis directly depends on this parameter.

Important: PCD of disks with four fixing bolts (or nuts) corresponds to the distance between the centers of opposite bolts (or nuts), PCD of disks with five fixing bolts (or nuts) corresponds to the distance between the centers of any non-adjacent bolts (or nuts) multiplied by the coefficient 1.051.



Dimensions tires Isuzu Gemini Dimensions wheels Isuzu Gemini

General view wheel disks




Possible disk parameters for Isuzu Gemini
General view spravkaGeneral view wheel disks Wheel disks spravka
Possible disk sizes for Isuzu Gemini of different years of manufacture and modifications

Wheels spravka
Possible wheel sizes for Isuzu Gemini of different years of manufacture and modifications

ET (mm) spravka
Disk offset

Distance between the vertical plane of symmetry of the wheel and the plane of contact of the disk to the hub.

Measured in millimeters (mm)

spravka
General view wheel disks
(General view)
14x5.0
13x5.0
14''
13''
45 (mm)
Table of disc sizes of Isuzu Gemini modifications
Year spravka
Model year of manufacture

Dimensions spravka
Disk size in format:

1. D - diameter of the disk in inches.

2. x - a sign indicating the inseparability of the disk.

3. B - disk width in inches.

spravka
ET (mm) spravka
Disc offset:

Distance between the vertical plane of symmetry of the wheel and the plane of contact of the disc to the hub.

spravka
PCD (mm) spravka
Disc drilling:

1. Number of bolt holes.

2. Diameter of the circle on which the mounting holes are located.

spravka
Tires spravka
Tire size in format:

1. Width of the work face.

2. Percentage of profile height to width.

3. R - type of construction (radial) - inner diameter (in inches).

spravka
DIA (mm) spravka
Center hole:

Diameter of center hole, another marking is CH.

spravka
Isuzu Gemini JT151F
1990xx4x100175/65R14x
1991xx4x100175/65R14x
1992xx4x100175/65R14x
Isuzu Gemini JT191F
1990xx4x100185/60R14x
1991xx4x100185/60R14x
1992xx4x100185/60R14x
Isuzu Gemini JT191S
1990xx4x100195/50R15x
1991xx4x100195/50R15x
1992xx4x100195/50R15x
Isuzu Gemini JT641F
1990xx4x100175/65R14x
1991xx4x100175/70R13x
1992xx4x100175/70R13x
1992xx4x100175/65R14x
Isuzu Gemini JT641S
1991xx4x100175/65R14x
1992xx4x100175/65R14x
199314x5.0454x100175/65R14x
199514x5.0454x100175/65R14x
199314x5.0454x100175/65R14x
199514x5.0454x100175/65R14x
199513x5.0454x100165/70R13x
199713x5.0454x100175/70R13x
199714x5.0454x100185/65R14x
199714x5.0454x100175/65R14x

Warning: despite the fact that the data are official figures of manufacturers, the above information is for reference only and does not guarantee unambiguous accuracy.