Disc sizes of Lamborghini Diablo
General parameters:
  • Offset (ET): -;
  • Drilling (PCD): -;
  • Center hole (DIA): -.

Important: wheel disc parameter PCD indicates not only the diameter of circumference of the mounting holes, but also the number of mounting bolts or nuts (for example: 5x120, where 120 (mm) is the diameter of centers of the mounting holes, and 5 is the number of mounting bolts).

Possible disk sizes for Lamborghini Diablo:
  • 17x8.5
  • 18x8.5
Procedure for calculating the disc offset:

The distance between mating face of the wheel (the face with which the disk is pressed against the hub) and the middle of the width of disk is called disk offset (ET).

The formula for calculating:

ET = A - B/2, where:

A is the distance between the inner plane of disk and the part in contact with the hub;

B is disk width.

The disk offset affects the width of the vehicle wheelbase, since the distance between the centers of symmetry (in width) of wheels on one axis directly depends on this parameter.

Important: PCD of disks with four fixing bolts (or nuts) corresponds to the distance between the centers of opposite bolts (or nuts), PCD of disks with five fixing bolts (or nuts) corresponds to the distance between the centers of any non-adjacent bolts (or nuts) multiplied by the coefficient 1.051.

Wheel disks - full drawing
Possible disk parameters for Lamborghini Diablo
General view spravka
General view

Disk spravka
Possible disk sizes for Lamborghini Diablo of different years of manufacture and modifications

Wheel spravka
Possible wheel sizes for Lamborghini Diablo of different years of manufacture and modifications

ET (mm) spravka
Disk offset

Distance between the vertical plane of symmetry of the wheel and the plane of contact of the disk to the hub.

Measured in millimeters (mm)

Dimensions wheel disks

(General view)
17''
18''
17x8.5
18x8.5
-
Table of disc sizes of Lamborghini Diablo modifications
Year spravka
Model year of manufacture

Size spravka
Disk size in format:

1. D - diameter of the disk in inches.

2. x - a sign indicating the inseparability of the disk.

3. B - disk width in inches.

spravka

ET (mm) spravka
Disc offset:

Distance between the vertical plane of symmetry of the wheel and the plane of contact of the disc to the hub.

spravka

PCD (mm) spravka
Disc drilling:

1. Number of bolt holes.

2. Diameter of the circle on which the mounting holes are located.

spravka

Tire spravka
Tire size in format:

1. Width of the work face.

2. Percentage of profile height to width.

3. R - type of construction (radial) - inner diameter (in inches).

spravka

DIA (mm) spravka
Center hole:

Diameter of center hole, another marking is CH.

spravka

Lamborghini DIABLO 5.7L
1994xxx245/40R17x
1994xxx335/35R17x
199417x8.5xx245/40R17x
1995xxx245/40R17x
1995xxx335/35R17x
199517x8.5xx245/40R17x
1996xxx245/40R17x
1996xxx335/35R17x
199617x8.5xx245/40R17x
1997xxx245/40R17x
1997xxx335/35R17x
199717x8.5xx245/40R17x
1998xxx245/40R17x
1998xxx335/35R17x
199817x8.5xx245/40R17x
Lamborghini DIABLO VT 6.0L
1999xxx245/35R18x
1999xxx335/30R18x
199918x8.5xx245/35R18x
2000xxx245/35R18x
2000xxx335/30R18x
200018x8.5xx245/35R18x
2001xxx245/35R18x
2001xxx335/30R18x
200118x8.5xx245/35R18x
2002xxx245/35R18x
2002xxx335/30R18x
200218x8.5xx245/35R18x
2003xxx245/35R18x
2003xxx335/30R18x
200318x8.5xx245/35R18x
2004xxx245/35R18x
2004xxx335/30R18x
200418x8.5xx245/35R18x

0 Comments