Disc sizes of Mazda Atenza
 General parameters: Offset (ET): from 50 to 60;Drilling (PCD): 5x114.3;Center hole (DIA): -.Important: wheel disc parameter PCD indicates not only the diameter of circumference of the mounting holes, but also the number of mounting bolts or nuts (for example: 5x120, where 120 (mm) is the diameter of centers of the mounting holes, and 5 is the number of mounting bolts). Possible disk sizes for Mazda Atenza: 16x7.015x6.018x7.017x7.016x6.018x7.516x6.5 Procedure for calculating the disc offset: The distance between mating face of the wheel (the face with which the disk is pressed against the hub) and the middle of the width of disk is called disk offset (ET).The formula for calculating:ET = A - B/2, where:A is the distance between the inner plane of disk and the part in contact with the hub;B is disk width.The disk offset affects the width of the vehicle wheelbase, since the distance between the centers of symmetry (in width) of wheels on one axis directly depends on this parameter.Important: PCD of disks with four fixing bolts (or nuts) corresponds to the distance between the centers of opposite bolts (or nuts), PCD of disks with five fixing bolts (or nuts) corresponds to the distance between the centers of any non-adjacent bolts (or nuts) multiplied by the coefficient 1.051.
Wheel disks - full drawing
Possible disk parameters for Mazda Atenza
General view
General view

Disk
Possible disk sizes for Mazda Atenza of different years of manufacture and modifications

Wheel
Possible wheel sizes for Mazda Atenza of different years of manufacture and modifications

ET (mm)
Disk offset

Distance between the vertical plane of symmetry of the wheel and the plane of contact of the disk to the hub.

Measured in millimeters (mm)

(General view)
16''
15''
18''
17''
16x7.0
15x6.0
18x7.0
17x7.0
16x6.0
18x7.5
16x6.5
from 50 to 60
Table of disc sizes of Mazda Atenza modifications
Year
Model year of manufacture

Size
Disk size in format:

1. D - diameter of the disk in inches.

3. B - disk width in inches.

ET (mm)
Disc offset:

Distance between the vertical plane of symmetry of the wheel and the plane of contact of the disc to the hub.

PCD (mm)
Disc drilling:

1. Number of bolt holes.

2. Diameter of the circle on which the mounting holes are located.

Tire
Tire size in format:

1. Width of the work face.

2. Percentage of profile height to width.

3. R - type of construction (radial) - inner diameter (in inches).

DIA (mm)
Center hole:

Diameter of center hole, another marking is CH.

Mazda Atenza 2.0L
200216x7.050x205/55R16x
200316x7.050x205/55R16x
200416x7.050x205/55R16x
200516x7.050x205/55R16x
200616x7.050x205/55R16x
200716x7.050x205/55R16x
Mazda Atenza 2.3L
200216x7.050x205/55R16x
200316x7.050x205/55R16x
200416x7.050x205/55R16x
200516x7.050x205/55R16x
200616x7.050x205/55R16x
200716x7.050x205/55R16x
Mazda Atenza GG3P
200215x6.0505x114.3195/65R15x
200216x7.0555x114.3205/55R16x
200516x7.0555x114.3205/55R16x
200518x7.0555x114.3215/45R18x
Mazda Atenza GG3S
200215x6.0505x114.3195/65R15x
200217x7.0555x114.3215/45R17x
200318x7.0555x114.3215/45R18x
200517x7.0555x114.3215/45R17x
200518x7.0555x114.3215/45R18x
Mazda Atenza GGEP
200215x6.0505x114.3195/65R15x
200515x6.0505x114.3195/65R15x
200516x7.0555x114.3205/55R16x
Mazda Atenza GGES
200215x6.0505x114.3195/65R15x
200516x7.0555x114.3205/55R16x
200816x6.0505x114.3195/65R16x
Mazda Atenza GH5AS
200816x6.0505x114.3195/65R16x
200817x7.0605x114.3215/50R17x
Mazda Atenza GH5AW
200816x6.0505x114.3195/65R16x
200817x7.0605x114.3215/50R17x
Mazda Atenza GH5FS
200817x7.0605x114.3215/50R17x
200818x7.5605x114.3225/45R18x
Mazda Atenza GH5FW
200817x7.0605x114.3215/50R17x
200818x7.5605x114.3225/45R18x
200816x6.0505x114.3195/65R16x
200816x6.5555x114.3205/60R16x
200816x6.0505x114.3195/65R16x
Mazda Atenza GY3W
200215x6.0505x114.3195/65R15x
200217x7.0555x114.3215/45R17x
200318x7.0555x114.3215/45R18x
200515x6.0505x114.3195/65R15x
200517x7.0555x114.3215/45R17x
Mazda Atenza GYEW
200215x6.0505x114.3195/65R15x
200515x6.0505x114.3195/65R15x