Disc sizes of UAZ 23632
 General parameters: Offset (ET): from 20 to 35;Drilling (PCD): 5x139.7;Center hole (DIA): -.Important: wheel disc parameter PCD indicates not only the diameter of circumference of the mounting holes, but also the number of mounting bolts or nuts (for example: 5x120, where 120 (mm) is the diameter of centers of the mounting holes, and 5 is the number of mounting bolts). Possible disk sizes for UAZ 23632: 16x7.016x8.0 Procedure for calculating the disc offset: The distance between mating face of the wheel (the face with which the disk is pressed against the hub) and the middle of the width of disk is called disk offset (ET).The formula for calculating:ET = A - B/2, where:A is the distance between the inner plane of disk and the part in contact with the hub;B is disk width.The disk offset affects the width of the vehicle wheelbase, since the distance between the centers of symmetry (in width) of wheels on one axis directly depends on this parameter.Important: PCD of disks with four fixing bolts (or nuts) corresponds to the distance between the centers of opposite bolts (or nuts), PCD of disks with five fixing bolts (or nuts) corresponds to the distance between the centers of any non-adjacent bolts (or nuts) multiplied by the coefficient 1.051.
Wheel disks - full drawing
Possible disk parameters for UAZ 23632
General view
General view

Disk
Possible disk sizes for UAZ 23632 of different years of manufacture and modifications

Wheel
Possible wheel sizes for UAZ 23632 of different years of manufacture and modifications

ET (mm)
Disk offset

Distance between the vertical plane of symmetry of the wheel and the plane of contact of the disk to the hub.

Measured in millimeters (mm)

(General view)
16''
16x7.0
16x8.0
from 20 to 35
Table of disc sizes of UAZ 23632 modifications
Year
Model year of manufacture

Size
Disk size in format:

1. D - diameter of the disk in inches.

3. B - disk width in inches.

ET (mm)
Disc offset:

Distance between the vertical plane of symmetry of the wheel and the plane of contact of the disc to the hub.

PCD (mm)
Disc drilling:

1. Number of bolt holes.

2. Diameter of the circle on which the mounting holes are located.

Tire
Tire size in format:

1. Width of the work face.

2. Percentage of profile height to width.

3. R - type of construction (radial) - inner diameter (in inches).

DIA (mm)
Center hole:

Diameter of center hole, another marking is CH.

UAZ PickUp 2.7i
200816x7.0355x139.7245/70R16x
200816x7.0355x139.7225/75R16x
200916x7.0355x139.7225/75R16x
200916x7.0355x139.7245/70R16x
201016x7.0355x139.7225/75R16x
201016x7.0355x139.7245/70R16x
UAZ PickUp 2.7i
200816x8.0205x139.7225/75R16x
200816x8.0205x139.7235/70R16x
200816x8.0205x139.7245/70R16x
200816x8.0205x139.7255/65R16x
200916x8.0205x139.7225/75R16x
200916x8.0205x139.7235/70R16x
200916x8.0205x139.7245/70R16x
200916x8.0205x139.7255/65R16x
201016x8.0205x139.7255/65R16x
201016x8.0205x139.7225/75R16x
201016x8.0205x139.7235/70R16x
201016x8.0205x139.7245/70R16x
201116x8.0205x139.7245/70R16x
201116x8.0205x139.7255/65R16x
201116x8.0205x139.7225/75R16x
201116x8.0205x139.7235/70R16x
201216x8.0205x139.7225/75R16x
201216x8.0205x139.7235/70R16x
201216x8.0205x139.7245/70R16x
201216x8.0205x139.7255/65R16x
201316x8.0205x139.7225/75R16x
201316x8.0205x139.7235/70R16x
201316x8.0205x139.7245/70R16x
201316x8.0205x139.7255/65R16x
201416x8.0205x139.7245/70R16x
201416x8.0205x139.7255/65R16x
201416x8.0205x139.7225/75R16x
201416x8.0205x139.7235/70R16x
201516x8.0205x139.7225/75R16x
201516x8.0205x139.7235/70R16x
201516x8.0205x139.7245/70R16x
201516x8.0205x139.7255/65R16x
201616x8.0205x139.7225/75R16x
201616x8.0205x139.7235/70R16x
201616x8.0205x139.7245/70R16x
201616x8.0205x139.7255/65R16x
201716x8.0205x139.7255/65R16x
201716x8.0205x139.7225/75R16x
201716x8.0205x139.7235/70R16x
201716x8.0205x139.7245/70R16x
201816x8.0205x139.7245/70R16x
201816x8.0205x139.7255/65R16x
201816x8.0205x139.7225/75R16x
201816x8.0205x139.7235/70R16x