Sizes of wheel bolts of Austin Mini
Total dimensions of fasteners:
  • Number of fasteners: -;
  • Fastener size: M12x1.5;
  • Diameter of the mounting holes (PCD): -;
  • Disc offset (ET): -.

Important: the above data are limits for all vehicle modifications, specific figures depend on the year of manufacture.

Rules for selecting wheel fasteners:

Different wheel fasteners are often used for cast and stamped disks - this applies to the length of the bolts, since the thickness of different types of disks can vary significantly.

When selecting any fasteners, special attention should be paid to the thread pitch. This parameter is always indicated after the “x” in the marking.

Most of the wheel fasteners have metric threads with fine pitch (М12х1.25/М12х1.5/М14х1.25/М14х1.5), which must correspond to the threads of thread studs or threaded holes in the wheel hub.

Important: the marking of fastener bolt M12x1.5 is deciphered as follows: thread with a nominal diameter of 12 (mm), thread pitch 1.5 (mm).

Wheel fastener - full drawing
General parameters of wheel bolts of Austin Mini
General view spravka
General view

spravka
Number of fasteners per hub for Austin Mini.

Size spravka
Metric size of fasteners:

Thread M14 x 1.5 means:

M14 - thread diameter 14 (mm);
1.5 - thread pitch (distance between adjacent threads).

PCD (mm) spravka
Disc drilling:

1. Number of bolt holes.

2. Diameter of the circle on which the mounting holes are located.

spravka

Dimensions bolts

(General view)
-M12x1.5-
Size tables of wheel bolts of Austin Mini
Years spravka
Year of manufacture or modification of the Mini

spravka
Number of fasteners per hub for Austin Mini.

Size spravka
Metric size of fasteners:

ThreadM14 x 1.5 means:

M14 - thread diameter 14 (mm);
1.5 - thread pitch (distance between adjacent threads).

PCD (mm) spravka
Disc drilling:

1. Number of bolt holes.

2. Diameter of the circle on which the mounting holes are located.

spravka

ET (mm) spravka
Disc offset:

Distance between the vertical plane of symmetry of the wheel and the plane of contact of the disc to the hub.

spravka

1967xM12x1.5xx
1968xM12x1.5xx
1969xM12x1.5xx
1970xM12x1.5xx
1971xM12x1.5xx
1972xM12x1.5xx
1973xM12x1.5xx
1974xM12x1.5xx
1975xM12x1.5xx
1976xM12x1.5xx
1977xM12x1.5xx
1978xM12x1.5xx
1979xM12x1.5xx
1000
1967xM12x1.5xx
1968xM12x1.5xx
1969xM12x1.5xx
1970xM12x1.5xx
1971xM12x1.5xx
1972xM12x1.5xx
1973xM12x1.5xx
1974xM12x1.5xx
1975xM12x1.5xx
1976xM12x1.5xx
1977xM12x1.5xx
1978xM12x1.5xx
1979xM12x1.5xx
1980xM12x1.5xx
1981xM12x1.5xx
1982xM12x1.5xx
1983xM12x1.5xx
1984xM12x1.5xx
1000 MAYFAIR
1982xM12x1.5xx
1983xM12x1.5xx
1984xM12x1.5xx
1985xM12x1.5xx
1986xM12x1.5xx
1987xM12x1.5xx
1988xM12x1.5xx
1989xM12x1.5xx
1990xM12x1.5xx
1991xM12x1.5xx
1992xM12x1.5xx
1993xM12x1.5xx
1000 MAYFAIR SPORT
1988xM12x1.5xx
1989xM12x1.5xx
1990xM12x1.5xx
1991xM12x1.5xx
1992xM12x1.5xx
1993xM12x1.5xx

0 Comments