Sizes of wheel bolts of BMW 218i
Total dimensions of fasteners:
  • Number of fasteners: 5;
  • Fastener size: M14x1.25;
  • Diameter of the mounting holes (PCD): 112;
  • Disc offset (ET): from 47 to 57.

Important: the above data are limits for all vehicle modifications, specific figures depend on the year of manufacture.

Rules for selecting wheel fasteners:

Different wheel fasteners are often used for cast and stamped disks - this applies to the length of the bolts, since the thickness of different types of disks can vary significantly.

When selecting any fasteners, special attention should be paid to the thread pitch. This parameter is always indicated after the “x” in the marking.

Most of the wheel fasteners have metric threads with fine pitch (М12х1.25/М12х1.5/М14х1.25/М14х1.5), which must correspond to the threads of thread studs or threaded holes in the wheel hub.

Important: the marking of fastener bolt M12x1.5 is deciphered as follows: thread with a nominal diameter of 12 (mm), thread pitch 1.5 (mm).

Wheel fastener - full drawing
General parameters of wheel bolts of BMW 218i
General view spravka
General view

spravka
Number of fasteners per hub for BMW model.

Size spravka
Metric size of fasteners:

Thread M14 x 1.5 means:

M14 - thread diameter 14 (mm);
1.5 - thread pitch (distance between adjacent threads).

PCD (mm) spravka
Disc drilling:

1. Number of bolt holes.

2. Diameter of the circle on which the mounting holes are located.

spravka

Dimensions bolts

(General view)
5M14x1.25112
Size tables of wheel bolts of BMW 218i
Years spravka
Year of manufacture or modification of the 218i

spravka
Number of fasteners per hub for BMW model.

Size spravka
Metric size of fasteners:

ThreadM14 x 1.5 means:

M14 - thread diameter 14 (mm);
1.5 - thread pitch (distance between adjacent threads).

PCD (mm) spravka
Disc drilling:

1. Number of bolt holes.

2. Diameter of the circle on which the mounting holes are located.

spravka

ET (mm) spravka
Disc offset:

Distance between the vertical plane of symmetry of the wheel and the plane of contact of the disc to the hub.

spravka

Болт
20145M14x1.2511247
20145M14x1.2511252
20145M14x1.2511254
20145M14x1.2511257
20155M14x1.2511247
20155M14x1.2511252
20155M14x1.2511254
20155M14x1.2511257
20165M14x1.2511247
20165M14x1.2511252
20165M14x1.2511254
20165M14x1.2511257
20175M14x1.2511247
20175M14x1.2511252
20175M14x1.2511254
20175M14x1.2511257
20185M14x1.2511247
20185M14x1.2511252
20185M14x1.2511254
20185M14x1.2511257
20195M14x1.2511247
20195M14x1.2511252
20195M14x1.2511254
20195M14x1.2511257

0 Comments