Sizes of wheel fasteners of Buick Wildcat
Total dimensions of fasteners:
  • Number of fasteners: 5;
  • Fastener size: -;
  • Diameter of the mounting holes (PCD): from 120.65 to 127;
  • Disc offset (ET): 2.

Important: the above data are limits for all vehicle modifications, specific figures depend on the year of manufacture.

Rules for selecting wheel fasteners:

Different wheel fasteners are often used for cast and stamped disks - this applies to the length of the bolts, since the thickness of different types of disks can vary significantly.

When selecting any fasteners, special attention should be paid to the thread pitch. This parameter is always indicated after the “x” in the marking.

Most of the wheel fasteners have metric threads with fine pitch (М12х1.25/М12х1.5/М14х1.25/М14х1.5), which must correspond to the threads of thread studs or threaded holes in the wheel hub.

Important: the marking of fastener bolt M12x1.5 is deciphered as follows: thread with a nominal diameter of 12 (mm), thread pitch 1.5 (mm).

Wheel fastener - full drawing
General parameters of wheel fasteners of Buick Wildcat
General view spravka
General view

spravka
Number of fasteners per hub for Buick Wildcat.

Size spravka
Metric size of fasteners:

Thread M14 x 1.5 means:

M14 - thread diameter 14 (mm);
1.5 - thread pitch (distance between adjacent threads).

PCD (mm) spravka
Disc drilling:

1. Number of bolt holes.

2. Diameter of the circle on which the mounting holes are located.

spravka

Dimensions fasteners

(General view)
5-from 120.65 to 127
Size tables of wheel fasteners of Buick Wildcat
Years spravka
Year of manufacture or modification of the Wildcat

spravka
Number of fasteners per hub for Buick Wildcat.

Size spravka
Metric size of fasteners:

ThreadM14 x 1.5 means:

M14 - thread diameter 14 (mm);
1.5 - thread pitch (distance between adjacent threads).

PCD (mm) spravka
Disc drilling:

1. Number of bolt holes.

2. Diameter of the circle on which the mounting holes are located.

spravka

ET (mm) spravka
Disc offset:

Distance between the vertical plane of symmetry of the wheel and the plane of contact of the disc to the hub.

spravka

Big-block engine
19655x1272
19665x1272
19675x1272
19685x1272
19695x1272
19705x1272
Small-block engine
19655x120.652
19665x120.652
19675x120.652
19685x120.652
19695x120.652
19705x120.652

0 Comments