Sizes of wheel fasteners of Chevrolet Van
Total dimensions of fasteners:
  • Number of fasteners: 5;
  • Fastener size: -;
  • Diameter of the mounting holes (PCD): 127;
  • Disc offset (ET): 5.

Important: the above data are limits for all vehicle modifications, specific figures depend on the year of manufacture.

Rules for selecting wheel fasteners:

Different wheel fasteners are often used for cast and stamped disks - this applies to the length of the bolts, since the thickness of different types of disks can vary significantly.

When selecting any fasteners, special attention should be paid to the thread pitch. This parameter is always indicated after the “x” in the marking.

Most of the wheel fasteners have metric threads with fine pitch (М12х1.25/М12х1.5/М14х1.25/М14х1.5), which must correspond to the threads of thread studs or threaded holes in the wheel hub.

Important: the marking of fastener bolt M12x1.5 is deciphered as follows: thread with a nominal diameter of 12 (mm), thread pitch 1.5 (mm).

Wheel fastener - full drawing
General parameters of wheel fasteners of Chevrolet Van
General view spravka
General view

spravka
Number of fasteners per hub for Chevrolet Van.

Size spravka
Metric size of fasteners:

Thread M14 x 1.5 means:

M14 - thread diameter 14 (mm);
1.5 - thread pitch (distance between adjacent threads).

PCD (mm) spravka
Disc drilling:

1. Number of bolt holes.

2. Diameter of the circle on which the mounting holes are located.

spravka

Dimensions fasteners

(General view)
5-127
Size tables of wheel fasteners of Chevrolet Van
Years spravka
Year of manufacture or modification of the Van

spravka
Number of fasteners per hub for Chevrolet Van.

Size spravka
Metric size of fasteners:

ThreadM14 x 1.5 means:

M14 - thread diameter 14 (mm);
1.5 - thread pitch (distance between adjacent threads).

PCD (mm) spravka
Disc drilling:

1. Number of bolt holes.

2. Diameter of the circle on which the mounting holes are located.

spravka

ET (mm) spravka
Disc offset:

Distance between the vertical plane of symmetry of the wheel and the plane of contact of the disc to the hub.

spravka

5 lugs
19715x1275
19725x1275
19735x1275
19745x1275
19755x1275
19765x1275
19775x1275
19785x1275
19795x1275
19805x1275
19815x1275
19825x1275
19835x1275
19845x1275
19855x1275
19865x1275
19875x1275
19885x1275
19895x1275
19905x1275
19915x1275
19925x1275
19935x1275
19945x1275
19955x1275

0 Comments