Sizes of Chevrolet wheel fastener - Dimension tables

Sizes of wheel nuts of Chery Very

For the Very model, the wheel is attached to the hub using wheel nuts. The number of fasteners depends on the Very year of manufacture and is presented in the table below.

Total dimensions of fasteners:

Number of fasteners: 4;
Fastener size: M12x1.5;
Diameter of the mounting holes (PCD): 114.3;
Disc offset (ET): 57.10.

Important: the above data are limits for all vehicle modifications, specific figures depend on the year of manufacture.

Rules for selecting wheel fasteners:

Different wheel fasteners are often used for cast and stamped disks - this applies to the length of the bolts, since the thickness of different types of disks can vary significantly.

When selecting any fasteners, special attention should be paid to the thread pitch. This parameter is always indicated after the “x” in the marking.

Most of the wheel fasteners have metric threads with fine pitch (М12х1.25/М12х1.5/М14х1.25/М14х1.5), which must correspond to the threads of thread studs or threaded holes in the wheel hub.

Important: the marking of fastener bolt M12x1.5 is deciphered as follows: thread with a nominal diameter of 12 (mm), thread pitch 1.5 (mm).

Wheel fastener - full drawing

General parameters of wheel fastener for Chevrolet

General view General view	N Number of fasteners per hub for marka. Measured in pieces.	Size Metric size of fasteners: Thread M14 x 1.5 means: M14 - thread diameter 14 (mm); 1.5 thread pitch (distance between adjacent threads).	PCD (mm) Disc drilling: 1. Number of bolt holes. 2. Diameter of the circle on which the mounting holes are located.
(General view)	-	from 4 to 8	from 1/2-20UNF to M14x1.5

Possible fastener sizes for all Chevrolet vehicles

N Number of fasteners per hub for marka. Measured in pieces.	Size Metric size of fasteners: ThreadM14 x 1.5 means: M14 - thread diameter 14 (mm); 1.5 thread pitch (distance between adjacent threads).	PCD (mm) Disc drilling: 1. Number of bolt holes. 2. Diameter of the circle on which the mounting holes are located.	ET (mm) Disc offset: Distance between the vertical plane of symmetry of the wheel and the plane of contact of the disc to the hub.
4	M12x1.5	100	56.60
5	M12x1.5	115	70.10
6	1/2in20UTF	139.7	78.30
5	1/2in20UTF	127	78.30
6	M14x1.5	139.7	78.10
5	M12x1.5	100	57.10
5	M12x1.5	120.65	70.10
5	1/2in20UTF	120.65	70.10
6	7/16in20UTF	139.7	78.30
5	7/16in20UTF	127	78.30
5	7/16in20UTF	120.65	70.10
5	M14x1.5	120	67.10
5	M12x1.5	127	78.30
5	M14x1.5	120.65	70.10
5	M12x1.5	105	56.60
5	M12x1.5	115	57.10
5	M12x1.5	100	70.10
4	M12x1.5	100	56.10
5	M12x1.5	115	56.60
4	M12x1.5	100	57.10
5	M12x1.5	110	57.10
5	M12x1.5	110	65.10
4	M12x1.5	100	65.10
6	M14x1.5	120	66.60
6	M12x1.5	120	100.30
6	M12x1.5	139.7	100.30
5	M12x1.5	105	70.10
4	M12x1.25	100	54.10
4	M12x1.5	114.3	56.60
5	M14x1.5	120	66.60
6	14x1.5	139.7	20
4	M12x1.25	114.3	60.10
4	M12x1.5	100	49
4	M12x1.5	100	54.10
5	M12x1.25	139.7	98.50
5	M14x1.5	127	78.10
4	M12x1.25	114.3	69.10
4	M12x1.25	100	69.10
6	M12x1.5	127	78.30
6	M14x1.5	139.7	78.30
6	M12x1.5	139.7	100.00
5	M12x1.25	139.7	104.10
6	M12x1.5	127	78.10
6	M14x1.5	132	74.50
6	M12x1.5	115	70.10
5	x	127	5
5	M12x1.5	120.65	56
5	M12x1.5	120.65	40
8	M14x1.5	165.1	78.30
8	M14x1.5	165.1	116.60
5	x	120.65	30
5	x	120.65	50
5	x	120.65	52
5	M12x1.5	120.65	58
5	M12x1.5	120.65	54
5	x	120.65	48
5	x	120.65	60
5	x	120.65	56
4	M12x1.5	100	39
4	M12x1.5	100	41.5
4	M12x1.5	100	45
x	M12x1.5	x	x
4	M12x1.5	114.3	57.10
4	M12x1.5	100	43.5
5	x	120.65	x
5	M12x1.5	105	44
5	1/2-20UNF	127	0
5	M14x1.5	127	78.30
8	x	165	0
8	x	165	x
5	x	120.65	10
4	x	114.3	5
5	M12x1.25	114.3	66.10
4	7/16in20UTF	114.3	x
5	7/16in20UTF	120.65	x
5	7/16"-20UNF	120.65	0
5	7/16"-20UNF	120.65	14.2
5	x	120.65	0
5	x	120.65	3
4	M12x1.5	100	x
6	M12x1.5	139.7	78.30
6	M14x1.5	139.7	117.00
8	M14x1.5	165.1	116.70
6	M12x1.5	139.7	31
8	M14x1.5	165.1	18
6	7/16"-20UNF	139.7	0
6	x	139.7	1
6	M12x1.5	139.7	108.00
4	x	100	x
4	M12x1.5	100	47
8	M14x1.5	180	124.10
8	M14x1.5	210	154.20
8	M14x1.5	180	154.20
4	M12x1.5	100	50
4	M12x1.25	114.3	38
4	M12x1.25	114.3	42
4	M12x1.25	114.3	45
4	M12x1.25	114.3	30
4	M12x1.25	114.3	32
4	M12x1.25	114.3	35
6	M12x1.5	139.7	100.10
5	M12x1.5	139.7	25
5	M12x1.5	139.7	20
5	M12x1.5	139.7	30
4	x	100	49
5	x	110	49
5	M12x1.5	98	58.10
5	M12x1.5	120	30
5	M12x1.5	110	39
4	M12x1.25	114.3	72.00
4	M12x1.5	114.3	64.10
5	M12x1.25	100	56.10

Warning: the above data are official figures of the manufacturers, however, it should be borne in mind that the information is for reference and does not guarantee unambiguous accuracy.

Wheel fastener Chevrolet by models:

0 Comments