- Wheel fastener Daewoo Winstorm MaXX
- Wheel fastener Daewoo Arcadia
- Wheel fastener Daewoo Chairman
- Wheel fastener Daewoo Damas
- Wheel fastener Daewoo Espero
- Wheel fastener Daewoo Evanda
- Wheel fastener Daewoo G2X
- Wheel fastener Daewoo Gentra
- Wheel fastener Daewoo Kalos
- Wheel fastener Daewoo Korando
- Wheel fastener Daewoo Lacetti
- Wheel fastener Daewoo Lanos
- Wheel fastener Daewoo LE Mans
- Wheel fastener Daewoo Leganza
- Wheel fastener Daewoo Magnus
- Wheel fastener Daewoo Matiz
- Wheel fastener Daewoo Musso
- Wheel fastener Daewoo Nexia
- Wheel fastener Daewoo Nubira
- Wheel fastener Daewoo Prince
- Wheel fastener Daewoo Racer
- Wheel fastener Daewoo Rezzo
- Wheel fastener Daewoo Tacuma
- Wheel fastener Daewoo Tico
- Wheel fastener Daewoo Tosca
- Wheel fastener Daewoo Winstorm
- Wheel fastener Daewoo Aranos
- Wheel fastener Daewoo Rexton
- Wheel fastener Daewoo Cielo
- Wheel fastener Daewoo Kondor
- Wheel fastener Daewoo Orion
- Wheel fastener Daewoo Pointer
- Wheel fastener Daewoo Brougham
- Wheel fastener Daewoo Super Salon
- Wheel fastener Daewoo Fino
- Wheel fastener Daewoo Sens
- Wheel fastener Daewoo Statesman
- Wheel fastener Daewoo Veritas
- Wheel fastener Daewoo Lublin
- Wheel fastener Daewoo Labo
- Wheel fastener Daewoo Imperial
- Wheel fastener Daewoo Speedster
Total dimensions of fasteners: |
Important: the above data are limits for all vehicle modifications, specific figures depend on the year of manufacture. |
Rules for selecting wheel fasteners: |
Different wheel fasteners are often used for cast and stamped disks - this applies to the length of the bolts, since the thickness of different types of disks can vary significantly. Most of the wheel fasteners have metric threads with fine pitch (М12х1.25/М12х1.5/М14х1.25/М14х1.5), which must correspond to the threads of thread studs or threaded holes in the wheel hub. Important: the marking of fastener bolt M12x1.5 is deciphered as follows: thread with a nominal diameter of 12 (mm), thread pitch 1.5 (mm). |
General view General view | N Number of fasteners per hub for marka. Measured in pieces. | Size Metric size of fasteners: Thread M14 x 1.5 means: M14 - thread diameter 14 (mm); 1.5 thread pitch (distance between adjacent threads). | PCD (mm) Disc drilling: 1. Number of bolt holes. 2. Diameter of the circle on which the mounting holes are located. |
---|---|---|---|
(General view) | - | from 4 to 6 | from M12x1.25 to M14x1.5 |
N Number of fasteners per hub for marka. Measured in pieces. | Size Metric size of fasteners: ThreadM14 x 1.5 means: M14 - thread diameter 14 (mm); 1.5 thread pitch (distance between adjacent threads). | PCD (mm) Disc drilling: 1. Number of bolt holes. 2. Diameter of the circle on which the mounting holes are located. | ET (mm) Disc offset: Distance between the vertical plane of symmetry of the wheel and the plane of contact of the disc to the hub. |
---|---|---|---|
5 | M12x1.5 | 115 | 70.10 |
5 | M12x1.5 | 114.3 | 70.10 |
5 | M14x1.5 | 112 | 66.60 |
4 | M12x1.25 | 114.3 | 72.00 |
4 | M12x1.5 | 100 | 56.60 |
4 | M12x1.5 | 114.3 | 56.60 |
5 | M12x1.5 | 110 | 65.10 |
6 | M12x1.5 | 139.7 | 107.10 |
5 | M12x1.5 | 114.3 | 56.60 |
4 | M12x1.25 | 114.3 | 69.10 |
4 | M12x1.5 | 100 | 57.10 |
x | M12x1.5 | x | x |
4 | x | 114.3 | 45 |
4 | x | 114.3 | 38 |
5 | M14x1.5 | 120.7 | 70.10 |
4 | M12x1.25 | 114.3 | 30 |
4 | M12x1.25 | 114.3 | 32 |
4 | M12x1.25 | 114.3 | 35 |
5 | M12x1.5 | 120 | 30 |
5 | M12x1.5 | 110 | 39 |