Sizes of wheel болтов of GAZ 2705

For the 2705 model, the wheel is attached to the hub using wheel болтов. The number of fasteners depends on the 2705 year of manufacture and is presented in the table below.

Total dimensions of fasteners:

  • Number of fasteners: 6 (units);
  • Fastener size: -;
  • Diameter of the mounting holes (PCD): 170 (mm);
  • Disc offset (ET): 105 (mm).

Important: the above data are limits for all vehicle modifications, specific figures depend on the year of manufacture.

Rules for selecting wheel fasteners:

Different wheel fasteners are often used for cast and stamped disks - this applies to the length of the bolts, since the thickness of different types of disks can vary significantly.

When selecting any fasteners, special attention should be paid to the thread pitch. This parameter is always indicated after the “x” in the marking.

Most of the wheel fasteners have metric threads with fine pitch (М12х1.25/М12х1.5/М14х1.25/М14х1.5), which must correspond to the threads of thread studs or threaded holes in the wheel hub.

Important: the marking of fastener bolt M12x1.5 is deciphered as follows: thread with a nominal diameter of 12 (mm), thread pitch 1.5 (mm).



General parameters of wheel болтов of GAZ 2705
General view spravkaGeneral view wheel fastener Quantity (units) spravka
Number of fasteners per hub for GAZ model.

Dimensions (mm) spravka
Metric size of fasteners:

Thread M14 x 1.5 means:

M14 - thread diameter 14 (mm);
1.5 - thread pitch (distance between adjacent threads).

spravka
General view spravka
Type of wheel fastener:

For fastening of wheels or discs, 2 main types of fasteners are used:

-wheel bolts;
-wheel nuts.

Dimensions болтов
(чертеж болтов)
6 (units) - Болт
Size tables of wheel болтов of GAZ 2705
Year Quantity (units) spravka
Number of fasteners per hub for GAZ model.

Dimensions (mm) spravka
Metric size of fasteners:

ThreadM14 x 1.5 means:

M14 - thread diameter 14 (mm);
1.5 - thread pitch (distance between adjacent threads).

spravka
PCD (mm) spravka
Diameter between fasteners:

Diameter of the circle on which the mounting holes are located for GAZ model.

spravka
ET (mm) spravka
Disc offset:

1. The distance between the vertical plane of symmetry of the wheel and the plane of contact of the disk to the hub.

spravka
ГАЗ ГАЗель 2.4
19946x170105
19956x170105
19966x170105
19976x170105
19986x170105
19996x170105
20006x170105
20016x170105
20026x170105
20036x170105
20046x170105
20056x170105
20066x170105
20076x170105
20086x170105
20096x170105
20106x170105

Warning: the above data are official figures of the manufacturers, however, it should be borne in mind that the information is for reference and does not guarantee unambiguous accuracy.