Sizes of wheel гаек of GAZ 3302

For the 3302 model, the wheel is attached to the hub using wheel гаек. The number of fasteners depends on the 3302 year of manufacture and is presented in the table below.

Total dimensions of fasteners:

  • Number of fasteners: -;
  • Fastener size: M18x1.5;
  • Diameter of the mounting holes (PCD): -;
  • Disc offset (ET): -.

Important: the above data are limits for all vehicle modifications, specific figures depend on the year of manufacture.

Rules for selecting wheel fasteners:

Different wheel fasteners are often used for cast and stamped disks - this applies to the length of the bolts, since the thickness of different types of disks can vary significantly.

When selecting any fasteners, special attention should be paid to the thread pitch. This parameter is always indicated after the “x” in the marking.

Most of the wheel fasteners have metric threads with fine pitch (М12х1.25/М12х1.5/М14х1.25/М14х1.5), which must correspond to the threads of thread studs or threaded holes in the wheel hub.

Important: the marking of fastener bolt M12x1.5 is deciphered as follows: thread with a nominal diameter of 12 (mm), thread pitch 1.5 (mm).



General parameters of wheel гаек of GAZ 3302
General view spravkaGeneral view wheel fastener Quantity (units) spravka
Number of fasteners per hub for GAZ model.

Dimensions (mm) spravka
Metric size of fasteners:

Thread M14 x 1.5 means:

M14 - thread diameter 14 (mm);
1.5 - thread pitch (distance between adjacent threads).

spravka
General view spravka
Type of wheel fastener:

For fastening of wheels or discs, 2 main types of fasteners are used:

-wheel bolts;
-wheel nuts.

Dimensions гаек
(чертеж гаек)
- M18x1.5 Гайка
Size tables of wheel гаек of GAZ 3302
Year Quantity (units) spravka
Number of fasteners per hub for GAZ model.

Dimensions (mm) spravka
Metric size of fasteners:

ThreadM14 x 1.5 means:

M14 - thread diameter 14 (mm);
1.5 - thread pitch (distance between adjacent threads).

spravka
PCD (mm) spravka
Diameter between fasteners:

Diameter of the circle on which the mounting holes are located for GAZ model.

spravka
ET (mm) spravka
Disc offset:

1. The distance between the vertical plane of symmetry of the wheel and the plane of contact of the disk to the hub.

spravka
2.0
1982xM18x1.5xx
1983xM18x1.5xx
1984xM18x1.5xx
1985xM18x1.5xx
1986xM18x1.5xx
1987xM18x1.5xx
1988xM18x1.5xx
1989xM18x1.5xx
1990xM18x1.5xx
1991xM18x1.5xx
1992xM18x1.5xx
1993xM18x1.5xx
1994xM18x1.5xx
1995xM18x1.5xx
1996xM18x1.5xx
1997xM18x1.5xx
2.1
1982xM18x1.5xx
1983xM18x1.5xx
1984xM18x1.5xx
1985xM18x1.5xx
1986xM18x1.5xx
1987xM18x1.5xx
1988xM18x1.5xx
1989xM18x1.5xx
1990xM18x1.5xx
1991xM18x1.5xx
1992xM18x1.5xx
1993xM18x1.5xx
1994xM18x1.5xx
1995xM18x1.5xx
1996xM18x1.5xx
1997xM18x1.5xx
2.3
1982xM18x1.5xx
1983xM18x1.5xx
1984xM18x1.5xx
1985xM18x1.5xx
1986xM18x1.5xx
1987xM18x1.5xx
1988xM18x1.5xx
1989xM18x1.5xx
1990xM18x1.5xx
1991xM18x1.5xx
1992xM18x1.5xx
1993xM18x1.5xx
1994xM18x1.5xx
1995xM18x1.5xx
1996xM18x1.5xx
1997xM18x1.5xx
1998xM18x1.5xx
1999xM18x1.5xx
2000xM18x1.5xx
2001xM18x1.5xx
2002xM18x1.5xx
2003xM18x1.5xx
2004xM18x1.5xx
2005xM18x1.5xx
2006xM18x1.5xx
2007xM18x1.5xx
2008xM18x1.5xx
2.4
1982xM18x1.5xx
1983xM18x1.5xx
1984xM18x1.5xx
1985xM18x1.5xx
1986xM18x1.5xx
1987xM18x1.5xx
1988xM18x1.5xx
1989xM18x1.5xx
1990xM18x1.5xx
1991xM18x1.5xx
1992xM18x1.5xx
1993xM18x1.5xx
1994xM18x1.5xx
1995xM18x1.5xx
1996xM18x1.5xx
1997xM18x1.5xx
1998xM18x1.5xx
1999xM18x1.5xx
2000xM18x1.5xx
2001xM18x1.5xx
2002xM18x1.5xx
2003xM18x1.5xx
2004xM18x1.5xx
2005xM18x1.5xx
2006xM18x1.5xx
2007xM18x1.5xx
2008xM18x1.5xx
2009xM18x1.5xx
2010xM18x1.5xx
2011xM18x1.5xx
2012xM18x1.5xx
2013xM18x1.5xx
2014xM18x1.5xx
2015xM18x1.5xx
2016xM18x1.5xx
2017xM18x1.5xx
2018xM18x1.5xx
2019xM18x1.5xx

Warning: the above data are official figures of the manufacturers, however, it should be borne in mind that the information is for reference and does not guarantee unambiguous accuracy.