- Wheel fastener Great Wall Coolbear
- Wheel fastener Great Wall Cowry
- Wheel fastener Great Wall Deer
- Wheel fastener Great Wall Florid
- Wheel fastener Great Wall Hover
- Wheel fastener Great Wall Hover M2
- Wheel fastener Great Wall Hover M4
- Wheel fastener Great Wall Pegasus
- Wheel fastener Great Wall Peri
- Wheel fastener Great Wall Safe
- Wheel fastener Great Wall Sailor
- Wheel fastener Great Wall Sing
- Wheel fastener Great Wall Socool
- Wheel fastener Great Wall Voleex C10
- Wheel fastener Great Wall Wingle
- Wheel fastener Great Wall Hover H3
- Wheel fastener Great Wall Hover H6
- Wheel fastener Great Wall Monster
- Wheel fastener Great Wall SUV G5
- Wheel fastener Great Wall Motor Lingao
- Wheel fastener Great Wall GWPeri
- Wheel fastener Great Wall Hover H5
- Wheel fastener Great Wall Voleex C30
- Wheel fastener Great Wall Hover M1
- Wheel fastener Great Wall Phenom
- Wheel fastener Great Wall Voleex C20R
- Wheel fastener Great Wall Voleex C50
- Wheel fastener Great Wall Wingle 3
- Wheel fastener Great Wall Wingle 5
- Wheel fastener Great Wall Wingle 6
- Wheel fastener Great Wall Steed
- Wheel fastener Great Wall V240
- Wheel fastener Great Wall Haval H3
- Wheel fastener Great Wall Haval M2
- Wheel fastener Great Wall V80
- Wheel fastener Great Wall Voleex V80
- Wheel fastener Great Wall Hafu
- Wheel fastener Great Wall X240
- Wheel fastener Great Wall H3
- Wheel fastener Great Wall Hover CUV
Total dimensions of fasteners: |
Important: the above data are limits for all vehicle modifications, specific figures depend on the year of manufacture. |
Rules for selecting wheel fasteners: |
Different wheel fasteners are often used for cast and stamped disks - this applies to the length of the bolts, since the thickness of different types of disks can vary significantly. Most of the wheel fasteners have metric threads with fine pitch (М12х1.25/М12х1.5/М14х1.25/М14х1.5), which must correspond to the threads of thread studs or threaded holes in the wheel hub. Important: the marking of fastener bolt M12x1.5 is deciphered as follows: thread with a nominal diameter of 12 (mm), thread pitch 1.5 (mm). |
General view ![]() General view | N ![]() Number of fasteners per hub for marka. Measured in pieces. | Size ![]() Metric size of fasteners: Thread M14 x 1.5 means: M14 - thread diameter 14 (mm); 1.5 thread pitch (distance between adjacent threads). | PCD (mm) ![]() Disc drilling: 1. Number of bolt holes. 2. Diameter of the circle on which the mounting holes are located. ![]() |
---|---|---|---|
![]() (General view) | - | from 4 to 6 | from 12x1.5 to M12x1.5 |
N ![]() Number of fasteners per hub for marka. Measured in pieces. | Size ![]() Metric size of fasteners: ThreadM14 x 1.5 means: M14 - thread diameter 14 (mm); 1.5 thread pitch (distance between adjacent threads). | PCD (mm) ![]() Disc drilling: 1. Number of bolt holes. 2. Diameter of the circle on which the mounting holes are located. ![]() | ET (mm) ![]() Disc offset: Distance between the vertical plane of symmetry of the wheel and the plane of contact of the disc to the hub. ![]() |
---|---|---|---|
4 | M12x1.25 | 100 | 54.10 |
5 | M12x1.5 | 114.3 | 67.10 |
6 | M12x1.25 | 139.7 | 105.00 |
5 | M12x1.25 | 114.3 | 64.10 |
6 | M12x1.25 | 139.7 | 100.00 |
4 | x | 100 | 40 |
6 | M12x1.5 | 139.7 | 110.00 |
4 | M12x1.5 | 100 | 56.10 |
6 | M12x1.5 | 139.7 | 108.00 |
6 | M12x1.5 | 139.7 | 100.00 |
6 | M12x1.25 | 139.7 | 54.10 |
6 | M12x1.5 | 139.7 | 100.10 |
6 | x | 139.7 | x |
6 | x | 139.6 | x |
4 | 12x1.5 | 100 | 46 |
5 | M12x1.25 | 114.3 | 54.10 |
6 | M12x1.25 | 139.7 | 100.10 |
x | M12x1.5 | x | x |