Sizes of wheel fasteners of Land Rover Defender PickUp

home ⇒ equipment ⇒ wheel fastener ⇒ land rover

For the Defender PickUp model, the wheel is attached to the hub using wheel fasteners. The number of fasteners depends on the Defender PickUp year of manufacture and is presented in the table below.

Total dimensions of fasteners:

Number of fasteners: 5;
Fastener size: -;
Diameter of the mounting holes (PCD): 165;
Disc offset (ET): 20.

Important: the above data are limits for all vehicle modifications, specific figures depend on the year of manufacture.

Rules for selecting wheel fasteners:

Different wheel fasteners are often used for cast and stamped disks - this applies to the length of the bolts, since the thickness of different types of disks can vary significantly.

When selecting any fasteners, special attention should be paid to the thread pitch. This parameter is always indicated after the “x” in the marking.

Most of the wheel fasteners have metric threads with fine pitch (М12х1.25/М12х1.5/М14х1.25/М14х1.5), which must correspond to the threads of thread studs or threaded holes in the wheel hub.

Important: the marking of fastener bolt M12x1.5 is deciphered as follows: thread with a nominal diameter of 12 (mm), thread pitch 1.5 (mm).

Wheel fastener - full drawing

General parameters of wheel fasteners of Land Rover Defender PickUp

General view General view	N Number of fasteners per hub for Land Rover Defender PickUp.	Size Metric size of fasteners: Thread M14 x 1.5 means: M14 - thread diameter 14 (mm); 1.5 - thread pitch (distance between adjacent threads).	PCD (mm) Disc drilling: 1. Number of bolt holes. 2. Diameter of the circle on which the mounting holes are located.
(General view)	5	-	165

Size tables of wheel fasteners of Land Rover Defender PickUp

Years Year of manufacture or modification of the Defender PickUp	n Number of fasteners per hub for Land Rover Defender PickUp.	Size Metric size of fasteners: ThreadM14 x 1.5 means: M14 - thread diameter 14 (mm); 1.5 - thread pitch (distance between adjacent threads).	PCD (mm) Disc drilling: 1. Number of bolt holes. 2. Diameter of the circle on which the mounting holes are located.	ET (mm) Disc offset: Distance between the vertical plane of symmetry of the wheel and the plane of contact of the disc to the hub.
Land Rover Defender PickUp 2.2 Td4 4.4
2011	5	x	165	20
2012	5	x	165	20
2013	5	x	165	20
2014	5	x	165	20
2015	5	x	165	20
2016	5	x	165	20
2017	5	x	165	20
2018	5	x	165	20
Land Rover Defender PickUp 2.4 Td4 4.4
2007	5	x	165	20
2008	5	x	165	20
2009	5	x	165	20
2010	5	x	165	20
2011	5	x	165	20
2012	5	x	165	20
2013	5	x	165	20
2014	5	x	165	20
2015	5	x	165	20
2016	5	x	165	20
2017	5	x	165	20
2018	5	x	165	20
Land Rover Defender PickUp 2.5 Td5 4.4
1998	5	x	165	20
1999	5	x	165	20
2000	5	x	165	20
2001	5	x	165	20
2002	5	x	165	20
2003	5	x	165	20
2004	5	x	165	20
2005	5	x	165	20
2006	5	x	165	20
2007	5	x	165	20
2008	5	x	165	20
2009	5	x	165	20
2010	5	x	165	20
2011	5	x	165	20
2012	5	x	165	20
2013	5	x	165	20
2014	5	x	165	20
2015	5	x	165	20
2016	5	x	165	20
2017	5	x	165	20
2018	5	x	165	20

Warning: the above data are official figures of the manufacturers, however, it should be borne in mind that the information is for reference and does not guarantee unambiguous accuracy.

Other parameters Land Rover Defender PickUp:

0 Comments