Sizes of wheel болтов of Land Rover Range Rover III

For the Range Rover III model, the wheel is attached to the hub using wheel болтов. The number of fasteners depends on the Range Rover III year of manufacture and is presented in the table below.

Total dimensions of fasteners:

  • Number of fasteners: 5 (units);
  • Fastener size: -;
  • Diameter of the mounting holes (PCD): 120 (mm);
  • Disc offset (ET): from 45 (mm) to 53 (mm).

Important: the above data are limits for all vehicle modifications, specific figures depend on the year of manufacture.

Rules for selecting wheel fasteners:

Different wheel fasteners are often used for cast and stamped disks - this applies to the length of the bolts, since the thickness of different types of disks can vary significantly.

When selecting any fasteners, special attention should be paid to the thread pitch. This parameter is always indicated after the “x” in the marking.

Most of the wheel fasteners have metric threads with fine pitch (М12х1.25/М12х1.5/М14х1.25/М14х1.5), which must correspond to the threads of thread studs or threaded holes in the wheel hub.

Important: the marking of fastener bolt M12x1.5 is deciphered as follows: thread with a nominal diameter of 12 (mm), thread pitch 1.5 (mm).



General parameters of wheel болтов of Land Rover Range Rover III
General view spravkaGeneral view wheel fastener Quantity (units) spravka
Number of fasteners per hub for Land Rover model.

Dimensions (mm) spravka
Metric size of fasteners:

Thread M14 x 1.5 means:

M14 - thread diameter 14 (mm);
1.5 - thread pitch (distance between adjacent threads).

spravka
General view spravka
Type of wheel fastener:

For fastening of wheels or discs, 2 main types of fasteners are used:

-wheel bolts;
-wheel nuts.

Dimensions болтов
(чертеж болтов)
5 (units) - Болт
Size tables of wheel болтов of Land Rover Range Rover III
Year Quantity (units) spravka
Number of fasteners per hub for Land Rover model.

Dimensions (mm) spravka
Metric size of fasteners:

ThreadM14 x 1.5 means:

M14 - thread diameter 14 (mm);
1.5 - thread pitch (distance between adjacent threads).

spravka
PCD (mm) spravka
Diameter between fasteners:

Diameter of the circle on which the mounting holes are located for Land Rover model.

spravka
ET (mm) spravka
Disc offset:

1. The distance between the vertical plane of symmetry of the wheel and the plane of contact of the disk to the hub.

spravka
Land Rover Range Rover III 3.0 D 4.4
20025x12045
20035x12045
20045x12045
20055x12045
20065x12045
20075x12045
20085x12045
20095x12045
20105x12045
20115x12045
20125x12045
Land Rover Range Rover III 3.6 D 4.4
20065x12045
20075x12045
20085x12045
20095x12045
20105x12045
20115x12045
20125x12045
Land Rover Range Rover III 4.2 4.4
20055x12045
20065x12045
20075x12045
20085x12045
20095x12045
20105x12045
20115x12045
20125x12045
Land Rover Range Rover III 4.4 4.4
20025x12053
20035x12053
20045x12053
20055x12053
20065x12053
20075x12053
20085x12053
20095x12053
20105x12053
20115x12053
20125x12053
Land Rover Range Rover III 4.4 D 4.4
20105x12053
20115x12053
20125x12053
Land Rover Range Rover III 5.0 4.4
20095x12053
20105x12053
20115x12053
20125x12053

Warning: the above data are official figures of the manufacturers, however, it should be borne in mind that the information is for reference and does not guarantee unambiguous accuracy.