Dimensions of Landwind wheel fastener
Varieties of fasteners:

For fastening wheels (discs), a vehicle designer uses two types of wheel fasteners:

  • Wheel bolts.
  • Wheel nuts.
Dimensions of the main parameters of fastener:

For all models and modifications of marka, the fastener parameters are in the following ranges:

  • Number of fasteners: from 5 to 6;
  • Fastener size: from M12x1.5 to M14x1.5;
  • Mounting hole diameter (PCD): from 108 to 139.7.
  • Disc offset (ET): from 63.40 to 100.50.

Important: the type of fastener depends on the design of vehicle, most often fastening with wheel bolts is more common for vehicles of European brands, fastening with wheel nuts is common for vehicles made in the USA, Japan, South Korea.

Wheel fastener - full drawing
General parameters of wheel fastener for Landwind
General view spravka
General view

spravka
Number of fasteners per hub for marka.

Measured in pieces.

Size spravka
Metric size of fasteners:

Thread M14 x 1.5 means:

M14 - thread diameter 14 (mm);
1.5 thread pitch (distance between adjacent threads).

PCD (mm) spravka
Disc drilling:

1. Number of bolt holes.

2. Diameter of the circle on which the mounting holes are located.

spravka

Dimensions wheel fastener

(General view)
from 5 to 6from M12x1.5 to M14x1.5from 108 to 139.7
Possible fastener sizes for all Landwind vehicles
spravka
Number of fasteners per hub for marka.

Measured in pieces.

Size spravka
Metric size of fasteners:

ThreadM14 x 1.5 means:

M14 - thread diameter 14 (mm);
1.5 thread pitch (distance between adjacent threads).

PCD (mm) spravka
Disc drilling:

1. Number of bolt holes.

2. Diameter of the circle on which the mounting holes are located.

spravka

ET (mm) spravka
Disc offset:

Distance between the vertical plane of symmetry of the wheel and the plane of contact of the disc to the hub.

spravka

6M12x1.5139.7100.50
5M14x1.510863.40

0 Comments