Sizes of wheel bolts of Mercedes-Benz S-Class

home ⇒ equipment ⇒ wheel fastener ⇒ mercedes-benz

For the S-Class model, the wheel is attached to the hub using wheel bolts. The number of fasteners depends on the S-Class year of manufacture and is presented in the table below.

Total dimensions of fasteners:

Number of fasteners: 5;
Fastener size: from M12x1.5 to M14x1.5;
Diameter of the mounting holes (PCD): 112;
Disc offset (ET): 66.60.

Important: the above data are limits for all vehicle modifications, specific figures depend on the year of manufacture.

Rules for selecting wheel fasteners:

Different wheel fasteners are often used for cast and stamped disks - this applies to the length of the bolts, since the thickness of different types of disks can vary significantly.

When selecting any fasteners, special attention should be paid to the thread pitch. This parameter is always indicated after the “x” in the marking.

Most of the wheel fasteners have metric threads with fine pitch (М12х1.25/М12х1.5/М14х1.25/М14х1.5), which must correspond to the threads of thread studs or threaded holes in the wheel hub.

Important: the marking of fastener bolt M12x1.5 is deciphered as follows: thread with a nominal diameter of 12 (mm), thread pitch 1.5 (mm).

Wheel fastener - full drawing

General parameters of wheel bolts of Mercedes-Benz S-Class

General view General view	N Number of fasteners per hub for Mercedes-Benz S-Class.	Size Metric size of fasteners: Thread M14 x 1.5 means: M14 - thread diameter 14 (mm); 1.5 - thread pitch (distance between adjacent threads).	PCD (mm) Disc drilling: 1. Number of bolt holes. 2. Diameter of the circle on which the mounting holes are located.
(General view)	5	from M12x1.5 to M14x1.5	112

Size tables of wheel bolts of Mercedes-Benz S-Class

Years Year of manufacture or modification of the S-Class	n Number of fasteners per hub for Mercedes-Benz S-Class.	Size Metric size of fasteners: ThreadM14 x 1.5 means: M14 - thread diameter 14 (mm); 1.5 - thread pitch (distance between adjacent threads).	PCD (mm) Disc drilling: 1. Number of bolt holes. 2. Diameter of the circle on which the mounting holes are located.	ET (mm) Disc offset: Distance between the vertical plane of symmetry of the wheel and the plane of contact of the disc to the hub.
2016	5	M14x1.5	112	66.60
2015	5	M14x1.5	112	66.60
2014	5	M14x1.5	112	66.60
2013	5	M14x1.5	112	66.60
2012	5	M14x1.5	112	66.60
2011	5	M14x1.5	112	66.60
2010	5	M14x1.5	112	66.60
2009	5	M14x1.5	112	66.60
2008	5	M14x1.5	112	66.60
2007	5	M14x1.5	112	66.60
2006	5	M14x1.5	112	66.60
2005	5	M14x1.5	112	66.60
2005	5	M14x1.5	112	66.60
S 600
2016	5	M14x1.5	112	66.60
2015	5	M14x1.5	112	66.60
2014	5	M14x1.5	112	66.60
2012	5	M14x1.5	112	66.60
2011	5	M14x1.5	112	66.60
2010	5	M14x1.5	112	66.60
2009	5	M14x1.5	112	66.60
2008	5	M14x1.5	112	66.60
2007	5	M14x1.5	112	66.60
2006	5	M14x1.5	112	66.60
2005	5	M14x1.5	112	66.60
2005	5	M14x1.5	112	66.60
S 300 BlueTEC
2016	5	M14x1.5	112	66.60
2015	5	M14x1.5	112	66.60
2014	5	M14x1.5	112	66.60
S 350 BlueTEC
2016	5	M14x1.5	112	66.60
2015	5	M14x1.5	112	66.60
2014	5	M14x1.5	112	66.60
2013	5	M14x1.5	112	66.60
2012	5	M14x1.5	112	66.60
2011	5	M14x1.5	112	66.60
2010	5	M14x1.5	112	66.60
S 400 Hybrid
2016	5	M14x1.5	112	66.60
2015	5	M14x1.5	112	66.60
2014	5	M14x1.5	112	66.60
2013	5	M14x1.5	112	66.60
2012	5	M14x1.5	112	66.60
2011	5	M14x1.5	112	66.60
2010	5	M14x1.5	112	66.60
2009	5	M14x1.5	112	66.60
S 500 e
2016	5	M14x1.5	112	66.60
2015	5	M14x1.5	112	66.60
S 500 Plug-In Hybrid
2016	5	M14x1.5	112	66.60
2015	5	M14x1.5	112	66.60
S 550
2016	5	M14x1.5	112	66.60
2015	5	M14x1.5	112	66.60
2014	5	M14x1.5	112	66.60
2013	5	M14x1.5	112	66.60
2012	5	M14x1.5	112	66.60
2011	5	M14x1.5	112	66.60
2010	5	M14x1.5	112	66.60
2009	5	M14x1.5	112	66.60
2008	5	M14x1.5	112	66.60
2007	5	M14x1.5	112	66.60
S 63 AMG
2016	5	M14x1.5	112	66.60
2015	5	M14x1.5	112	66.60
2014	5	M14x1.5	112	66.60
2013	5	M14x1.5	112	66.60
2012	5	M14x1.5	112	66.60
2011	5	M14x1.5	112	66.60
2010	5	M14x1.5	112	66.60
2009	5	M14x1.5	112	66.60
2008	5	M14x1.5	112	66.60
2007	5	M14x1.5	112	66.60
S 65 AMG
2016	5	M14x1.5	112	66.60
2015	5	M14x1.5	112	66.60
2014	5	M14x1.5	112	66.60
2012	5	M14x1.5	112	66.60
2011	5	M14x1.5	112	66.60
2010	5	M14x1.5	112	66.60
2009	5	M14x1.5	112	66.60
2008	5	M14x1.5	112	66.60
2007	5	M14x1.5	112	66.60
2006	5	M14x1.5	112	66.60
S 250 CDI
2012	5	M14x1.5	112	66.60
2011	5	M14x1.5	112	66.60
2010	5	M14x1.5	112	66.60
S 350
2012	5	M14x1.5	112	66.60
2011	5	M14x1.5	112	66.60
2010	5	M14x1.5	112	66.60
2009	5	M14x1.5	112	66.60
2008	5	M14x1.5	112	66.60
2007	5	M14x1.5	112	66.60
2006	5	M14x1.5	112	66.60
2005	5	M14x1.5	112	66.60
2005	5	M14x1.5	112	66.60
S 450
2012	5	M14x1.5	112	66.60
2011	5	M14x1.5	112	66.60
2010	5	M14x1.5	112	66.60
2009	5	M14x1.5	112	66.60
2008	5	M14x1.5	112	66.60
2007	5	M14x1.5	112	66.60
2006	5	M14x1.5	112	66.60
S 350 CDI
2010	5	M14x1.5	112	66.60
2009	5	M14x1.5	112	66.60
S 450 CDI
2010	5	M14x1.5	112	66.60
2009	5	M14x1.5	112	66.60
S 320 CDI
2009	5	M14x1.5	112	66.60
2008	5	M14x1.5	112	66.60
2007	5	M14x1.5	112	66.60
2006	5	M14x1.5	112	66.60
2005	5	M14x1.5	112	66.60
S 420 CDI
2009	5	M14x1.5	112	66.60
2008	5	M14x1.5	112	66.60
2007	5	M14x1.5	112	66.60
2006	5	M14x1.5	112	66.60
S280
2005	5	M14x1.5	112	66.60
2004	5	M14x1.5	112	66.60
2003	5	M14x1.5	112	66.60
2002	5	M14x1.5	112	66.60
2001	5	M14x1.5	112	66.60
2000	5	M14x1.5	112	66.60
1999	5	M14x1.5	112	66.60
1998	5	M14x1.5	112	66.60
1997	5	M14x1.5	112	66.60
1996	5	M14x1.5	112	66.60
1995	5	M14x1.5	112	66.60
1994	5	M14x1.5	112	66.60
1993	5	M14x1.5	112	66.60
1992	5	M14x1.5	112	66.60
1991	5	M14x1.5	112	66.60
S320
2005	5	M14x1.5	112	66.60
2004	5	M14x1.5	112	66.60
2003	5	M14x1.5	112	66.60
2002	5	M14x1.5	112	66.60
2001	5	M14x1.5	112	66.60
2000	5	M14x1.5	112	66.60
1999	5	M14x1.5	112	66.60
1998	5	M14x1.5	112	66.60
1997	5	M14x1.5	112	66.60
1996	5	M14x1.5	112	66.60
1995	5	M14x1.5	112	66.60
1994	5	M14x1.5	112	66.60
1993	5	M14x1.5	112	66.60
1992	5	M14x1.5	112	66.60
1991	5	M14x1.5	112	66.60
S400
2005	5	M14x1.5	112	66.60
2004	5	M14x1.5	112	66.60
2003	5	M14x1.5	112	66.60
2002	5	M14x1.5	112	66.60
2001	5	M14x1.5	112	66.60
2000	5	M14x1.5	112	66.60
1999	5	M14x1.5	112	66.60
S430
2005	5	M14x1.5	112	66.60
2004	5	M14x1.5	112	66.60
2003	5	M14x1.5	112	66.60
2002	5	M14x1.5	112	66.60
2001	5	M14x1.5	112	66.60
2000	5	M14x1.5	112	66.60
1999	5	M14x1.5	112	66.60
S350
2004	5	M14x1.5	112	66.60
2003	5	M14x1.5	112	66.60
2002	5	M14x1.5	112	66.60
2001	5	M14x1.5	112	66.60
2000	5	M14x1.5	112	66.60
1999	5	M14x1.5	112	66.60
S500
2004	5	M14x1.5	112	66.60
2003	5	M14x1.5	112	66.60
2002	5	M14x1.5	112	66.60
2001	5	M14x1.5	112	66.60
2000	5	M14x1.5	112	66.60
1999	5	M14x1.5	112	66.60
1998	5	M14x1.5	112	66.60
1997	5	M14x1.5	112	66.60
1996	5	M14x1.5	112	66.60
1995	5	M14x1.5	112	66.60
1994	5	M14x1.5	112	66.60
1993	5	M14x1.5	112	66.60
1992	5	M14x1.5	112	66.60
1991	5	M14x1.5	112	66.60
S600
2004	5	M14x1.5	112	66.60
2003	5	M14x1.5	112	66.60
2002	5	M14x1.5	112	66.60
2001	5	M14x1.5	112	66.60
2000	5	M14x1.5	112	66.60
1999	5	M14x1.5	112	66.60
1998	5	M14x1.5	112	66.60
1997	5	M14x1.5	112	66.60
1996	5	M14x1.5	112	66.60
1995	5	M14x1.5	112	66.60
1994	5	M14x1.5	112	66.60
1993	5	M14x1.5	112	66.60
1992	5	M14x1.5	112	66.60
1991	5	M14x1.5	112	66.60
S300 D
1998	5	M14x1.5	112	66.60
1997	5	M14x1.5	112	66.60
1996	5	M14x1.5	112	66.60
1995	5	M14x1.5	112	66.60
1994	5	M14x1.5	112	66.60
1993	5	M14x1.5	112	66.60
1992	5	M14x1.5	112	66.60
1991	5	M14x1.5	112	66.60
S350 D
1998	5	M14x1.5	112	66.60
1997	5	M14x1.5	112	66.60
1996	5	M14x1.5	112	66.60
1995	5	M14x1.5	112	66.60
1994	5	M14x1.5	112	66.60
1993	5	M14x1.5	112	66.60
1992	5	M14x1.5	112	66.60
1991	5	M14x1.5	112	66.60
S420
1998	5	M14x1.5	112	66.60
1997	5	M14x1.5	112	66.60
1996	5	M14x1.5	112	66.60
1995	5	M14x1.5	112	66.60
1994	5	M14x1.5	112	66.60
1993	5	M14x1.5	112	66.60
1992	5	M14x1.5	112	66.60
1991	5	M14x1.5	112	66.60
260 SE
1991	5	M12x1.5	112	66.60
1990	5	M12x1.5	112	66.60
1989	5	M12x1.5	112	66.60
1988	5	M12x1.5	112	66.60
1987	5	M12x1.5	112	66.60
1986	5	M12x1.5	112	66.60
1985	5	M12x1.5	112	66.60
280 S
1985	5	M12x1.5	112	66.60
1984	5	M12x1.5	112	66.60
1983	5	M12x1.5	112	66.60
1982	5	M12x1.5	112	66.60
1981	5	M12x1.5	112	66.60
1980	5	M12x1.5	112	66.60
1979	5	M12x1.5	112	66.60

Warning: the above data are official figures of the manufacturers, however, it should be borne in mind that the information is for reference and does not guarantee unambiguous accuracy.

Other parameters Mercedes-Benz S-Class:

0 Comments