Sizes of wheel nuts of Suzuki XL-7
Total dimensions of fasteners:
  • Number of fasteners: 5;
  • Fastener size: from M12x1.25 to M12x1.5;
  • Diameter of the mounting holes (PCD): from 115 to 139.7;
  • Disc offset (ET): from 70.10 to 108.00.

Important: the above data are limits for all vehicle modifications, specific figures depend on the year of manufacture.

Rules for selecting wheel fasteners:

Different wheel fasteners are often used for cast and stamped disks - this applies to the length of the bolts, since the thickness of different types of disks can vary significantly.

When selecting any fasteners, special attention should be paid to the thread pitch. This parameter is always indicated after the “x” in the marking.

Most of the wheel fasteners have metric threads with fine pitch (М12х1.25/М12х1.5/М14х1.25/М14х1.5), which must correspond to the threads of thread studs or threaded holes in the wheel hub.

Important: the marking of fastener bolt M12x1.5 is deciphered as follows: thread with a nominal diameter of 12 (mm), thread pitch 1.5 (mm).

Wheel fastener - full drawing
General parameters of wheel fastener for Toyota
General view spravka
General view

spravka
Number of fasteners per hub for marka.

Measured in pieces.

Size spravka
Metric size of fasteners:

Thread M14 x 1.5 means:

M14 - thread diameter 14 (mm);
1.5 thread pitch (distance between adjacent threads).

PCD (mm) spravka
Disc drilling:

1. Number of bolt holes.

2. Diameter of the circle on which the mounting holes are located.

spravka

Dimensions wheel fastener

(General view)
-from 4 to 6from M12x1.25 to M14x1.5
Possible fastener sizes for all Toyota vehicles
spravka
Number of fasteners per hub for marka.

Measured in pieces.

Size spravka
Metric size of fasteners:

ThreadM14 x 1.5 means:

M14 - thread diameter 14 (mm);
1.5 thread pitch (distance between adjacent threads).

PCD (mm) spravka
Disc drilling:

1. Number of bolt holes.

2. Diameter of the circle on which the mounting holes are located.

spravka

ET (mm) spravka
Disc offset:

Distance between the vertical plane of symmetry of the wheel and the plane of contact of the disc to the hub.

spravka

6M12x1.5139.7106.10
6M12x1.5139.7106.20
6M12x1.5139.7106.00
4M12x1.510054.10
5M12x1.510054.10
5M12x1.5114.360.10
5M12x1.510060.10
5M12x1.5114.354.10
5M12x1.5139.710
5M12x1.5114.366.60
5M12x1.510057.10
4M12x1.510060.10
4M12x1.5114.354.10
xM12x1.5xx
5M12x1.5114.367.10
6M12x1.5139.767.10
6M12x1.5139.7x
5M12x1.5114.3x
5M12x1.5114.3106.10
5M12x1.5112106.20
6M12x1.5139.760.10
5M12x1.511260.10
5M12x1.5114.3106.20
5M12x1.5112106.00
5M12x1.5150106.20
5M14x1.5150110.00
6M14x1.5139.7110.00
4M12x1.5114.360.10
5M14x1.5150110.50
4M12x1.510039
5M12x1.5114.3100.60
4x10039
4x10045
5x10039
5x114.339
5x114.345
5x10045
5x10040
5x10034
5x114.330
5x114.334
5x114.337
5x10035
5x114.324
5M12x1.2510056.10
5x114.335
6x139.730
6x139.750
5x150x
5x15038
6M12x1.5139.730
6M12x1.5139.750
5x15060
6x139.7x
6x139.710
6x139.725
4x114.327
5x114.333
5x114.340
6x139.715
6x139.75
6x139.720
6M12x1.5139.715
6M12x1.5139.725
5M12x1.2510865.10
4M12x1.5114.33
4M12x1.5114.38
5M12x1.511254.10
5M12x1.2510846
5M12x1.5112106.10
4M12x1.510045
5M12x1.5100x
5M12x1.5114.339
4M12x1.2510045
5M12x1.5114.345
5M12x1.5114.350
4M12x1.5100x
4M12x1.510040
5M12x1.510033
5M12x1.510039
5M12x1.510045
Wheel fastener Toyota by models:

0 Comments