Wheel sizes of Audi S2

home ⇒ equipment ⇒ wheels ⇒ audi

Minimum wheel diameter for the entire range of models is: (mm).

General characteristics:
  • Wheel width in the standard state without load (B): from 145-158 to 305-326;
  • Full diameter (D): from 575-587 to 763-773;
  • Circumference (L): from 1760 to 2398;
  • Wheel profile, height (H): from 64 to 172;
  • Rpm per 1000 (m): from 417.1 to 554.1.
Possible wheel sizes for Audi S2:
  • 16 ''
  • 17 ''
  • 18 ''
Fastener thread:

In most cases, wheel fastener thread has metric threads with fine pitch (М12х1.25/М12х1.5/М14х1.25/М14х1.5), which must correspond to the threads of thread studs or threaded holes in the wheel hub.

Important: fastening of wheel to the wheel hub is carried out using threaded connections, depending on the modification of vehicle, the designer uses bolts or studs with nuts.

Possible sizes for all Audi models of different years of manufacture and modifications
General view spravka
General view

Tire spravka
Maximum tire sizes for Audi

Disk spravka
Possible disk sizes for Audi of different years of manufacture and modifications

Wheel spravka
Possible wheel sizes for Audi of different years of manufacture and modifications

Dimensions wheels

(General view)		205/55R16
225/50R16
225/45R17
245/40R17
245/35R18
16x6.0
16x6.5
17x7.0
18x7.5
18x8.0
16''
17''
18''
Table of dimensions of wheels of Audi S2
Year spravka
Year of production

Size spravka
Tire size in format:

1. Width of work face.

2. Percentage of profile height from width.

3. R is type of construction (radial) - inner diameter (in inches).

spravka

B (mm) spravka
Wheel width:

1. Nominal wheel width (excluding protective belt).

2. Maximum width during operation.

spravka

D (mm) spravka
Wheel diameter:

1. Nominal size of outer diameter (2xR) of the wheel.

2. Maximum size during operation.

spravka

L (mm) spravka
Wheel circumference in (mm)

H (mm) spravka
Wheel profile:

Wheel profile (height) for models of different years of manufacture.

spravka

n spravka
Wheel revolutions per (km) under standard conditions
2.2Ti 8B
1996205/55R16205-223632-6421928113503.8
1996225/50R16225-242631-6421928113504.2
1996225/45R17225-234634-6421934101501.9
1996245/40R17245-258628-636191598507
1996245/35R18245-258629-639197586506.3
1995205/55R16205-223632-6421928113503.8
1995225/50R16225-242631-6421928113504.2
1995225/45R17225-234634-6421934101501.9
1995245/40R17245-258628-636191598507
1994205/55R16205-223632-6421928113503.8
1994225/50R16225-242631-6421928113504.2
1994225/45R17225-234634-6421934101501.9
1993205/55R16205-223632-6421928113503.8
1993225/50R16225-242631-6421928113504.2
1992205/55R16205-223632-6421928113503.8

Warning: it should be borne in mind that the data given are the average characteristics of the product during operation. Depending on the load, atmospheric phenomena and the degree of pumping, the wheel parameters can vary. Limit values are presented in the table above.


0 Comments