Wheel sizes of Austin Maestro

home ⇒ equipment ⇒ wheels ⇒ austin

Minimum wheel diameter for the entire range of models is: (mm).

General characteristics:
  • Wheel width in the standard state without load (B): from 145-151 to 335-357;
  • Full diameter (D): from 554-561 to 827-837;
  • Circumference (L): from 1699 to 2598;
  • Wheel profile, height (H): from 64 to 518;
  • Rpm per 1000 (m): from 384.9 to 572.
Possible wheel sizes for Austin Maestro:
  • 13 ''
  • 14 ''
  • 15 ''
Fastener thread:

In most cases, wheel fastener thread has metric threads with fine pitch (М12х1.25/М12х1.5/М14х1.25/М14х1.5), which must correspond to the threads of thread studs or threaded holes in the wheel hub.

Important: fastening of wheel to the wheel hub is carried out using threaded connections, depending on the modification of vehicle, the designer uses bolts or studs with nuts.

Possible sizes for all Austin models of different years of manufacture and modifications
General view spravka
General view

Tire spravka
Maximum tire sizes for Austin

Disk spravka
Possible disk sizes for Austin of different years of manufacture and modifications

Wheel spravka
Possible wheel sizes for Austin of different years of manufacture and modifications

Dimensions wheels

(General view)		175/80R13
185/75R13
185/65R14
195/65R14
195/55R15
13x5.5
14x5.5
14x6.0
15x6.0
15x6.5
13''
14''
15''
Table of dimensions of wheels of Austin Maestro
Year spravka
Year of production

Size spravka
Tire size in format:

1. Width of work face.

2. Percentage of profile height from width.

3. R is type of construction (radial) - inner diameter (in inches).

spravka

B (mm) spravka
Wheel width:

1. Nominal wheel width (excluding protective belt).

2. Maximum width during operation.

spravka

D (mm) spravka
Wheel diameter:

1. Nominal size of outer diameter (2xR) of the wheel.

2. Maximum size during operation.

spravka

L (mm) spravka
Wheel circumference in (mm)

H (mm) spravka
Wheel profile:

Wheel profile (height) for models of different years of manufacture.

spravka

n spravka
Wheel revolutions per (km) under standard conditions
All trims I
1990175/80R13173-177606-6141917140522
1990185/75R13183-187604-6121909139524
1990185/65R14185-197596-6061818120534
1990195/65R14195-209609-6201861127522.6
1990195/55R15195-209596-6031815107534.6
1989175/80R13173-177606-6141917140522
1989185/75R13183-187604-6121909139524
1989185/65R14185-197596-6061818120534
1989195/65R14195-209609-6201861127522.6
1988175/80R13173-177606-6141917140522
1988185/75R13183-187604-6121909139524
1988185/65R14185-197596-6061818120534
1987175/80R13173-177606-6141917140522
1987185/75R13183-187604-6121909139524
1986175/80R13173-177606-6141917140522

Warning: it should be borne in mind that the data given are the average characteristics of the product during operation. Depending on the load, atmospheric phenomena and the degree of pumping, the wheel parameters can vary. Limit values are presented in the table above.


0 Comments