Wheel sizes of Chery Yoki

home ⇒ equipment ⇒ wheels ⇒ chery

Minimum wheel diameter for the entire range of models is: (mm).

General characteristics:
  • Wheel width in the standard state without load (B): from 125-135 to 345-364;
  • Full diameter (D): from 487-495 to 970-977;
  • Circumference (L): from 1541 to 3070;
  • Wheel profile, height (H): from 58 to 518;
  • Rpm per 1000 (m): from 326 to 649.
Possible wheel sizes for Chery Yoki:
    Fastener thread:

    In most cases, wheel fastener thread has metric threads with fine pitch (М12х1.25/М12х1.5/М14х1.25/М14х1.5), which must correspond to the threads of thread studs or threaded holes in the wheel hub.

    Important: fastening of wheel to the wheel hub is carried out using threaded connections, depending on the modification of vehicle, the designer uses bolts or studs with nuts.

    Possible sizes for all Chery models of different years of manufacture and modifications
    General view spravka
    General view

    		Tire spravka
    Maximum tire sizes for Chery

    		Disk spravka
    Possible disk sizes for Chery of different years of manufacture and modifications

    		Wheel spravka
    Possible wheel sizes for Chery of different years of manufacture and modifications

    Dimensions wheels

    (General view)
    Table of dimensions of wheels of Chery Yoki
    Year spravka
    Year of production

    		Size spravka
    Tire size in format:

    1. Width of work face.

    2. Percentage of profile height from width.

    3. R is type of construction (radial) - inner diameter (in inches).

    spravka

    		B (mm) spravka
    Wheel width:

    1. Nominal wheel width (excluding protective belt).

    2. Maximum width during operation.

    spravka

    		D (mm) spravka
    Wheel diameter:

    1. Nominal size of outer diameter (2xR) of the wheel.

    2. Maximum size during operation.

    spravka

    		L (mm) spravka
    Wheel circumference in (mm)

    		H (mm) spravka
    Wheel profile:

    Wheel profile (height) for models of different years of manufacture.

    spravka

    		n spravka
    Wheel revolutions per (km) under standard conditions
    1.1i

    Warning: it should be borne in mind that the data given are the average characteristics of the product during operation. Depending on the load, atmospheric phenomena and the degree of pumping, the wheel parameters can vary. Limit values are presented in the table above.


    0 Comments