Wheel sizes of Dodge Monaco

home ⇒ equipment ⇒ wheels ⇒ dodge

Minimum wheel diameter for the entire range of models is: (mm).

General characteristics:
  • Wheel width in the standard state without load (B): from 133-137 to 335-357;
  • Full diameter (D): from 487-495 to 827-837;
  • Circumference (L): from 1541 to 2598;
  • Wheel profile, height (H): from 58 to 518;
  • Rpm per 1000 (m): from 384.9 to 649.
Possible wheel sizes for Dodge Monaco:
  • 14 ''
  • 15 ''
  • 16 ''
Fastener thread:

In most cases, wheel fastener thread has metric threads with fine pitch (М12х1.25/М12х1.5/М14х1.25/М14х1.5), which must correspond to the threads of thread studs or threaded holes in the wheel hub.

Important: fastening of wheel to the wheel hub is carried out using threaded connections, depending on the modification of vehicle, the designer uses bolts or studs with nuts.

Possible sizes for all Dodge models of different years of manufacture and modifications
General view spravka
General view

Tire spravka
Maximum tire sizes for Dodge

Disk spravka
Possible disk sizes for Dodge of different years of manufacture and modifications

Wheel spravka
Possible wheel sizes for Dodge of different years of manufacture and modifications

Dimensions wheels

(General view)		195/70R14
205/60R15
205/55R16
14x6.0
15x6.5
16x7.0
14''
15''
16''
Table of dimensions of wheels of Dodge Monaco
Year spravka
Year of production

Size spravka
Tire size in format:

1. Width of work face.

2. Percentage of profile height from width.

3. R is type of construction (radial) - inner diameter (in inches).

spravka

B (mm) spravka
Wheel width:

1. Nominal wheel width (excluding protective belt).

2. Maximum width during operation.

spravka

D (mm) spravka
Wheel diameter:

1. Nominal size of outer diameter (2xR) of the wheel.

2. Maximum size during operation.

spravka

L (mm) spravka
Wheel circumference in (mm)

H (mm) spravka
Wheel profile:

Wheel profile (height) for models of different years of manufacture.

spravka

n spravka
Wheel revolutions per (km) under standard conditions
3.0i B-body
1993195/70R14195-209629-6401922137506.4
1993205/60R15205-217627-6371912123507.7
1993205/55R16205-223632-6421928113503.8
1992195/70R14195-209629-6401922137506.4
1992205/60R15205-217627-6371912123507.7
1992205/55R16205-223632-6421928113503.8
1991195/70R14195-209629-6401922137506.4
1991205/60R15205-217627-6371912123507.7
1991205/55R16205-223632-6421928113503.8
1990195/70R14195-209629-6401922137506.4
1990205/60R15205-217627-6371912123507.7
1990205/55R16205-223632-6421928113503.8

Warning: it should be borne in mind that the data given are the average characteristics of the product during operation. Depending on the load, atmospheric phenomena and the degree of pumping, the wheel parameters can vary. Limit values are presented in the table above.


0 Comments