Wheel sizes of GAZ 53

Minimum wheel diameter for the entire range of models is: 745-753 (mm).

General characteristics:

  • Wheel width in the standard state without load (B): 238-242 (mm);
  • Full diameter (D): 745-753 (mm);
  • Circumference (L): 2366 (mm);
  • Wheel profile, height (H): 123 (mm);
  • Rpm per 1000 (m): 423 (mm).

Possible wheel sizes for GAZ model:

  • 240/50R20.

Fastener thread:

In most cases, wheel fastener thread has metric threads with fine pitch (М12х1.25/М12х1.5/М14х1.25/М14х1.5), which must correspond to the threads of thread studs or threaded holes in the wheel hub.

Important: fastening of wheel to the wheel hub is carried out using threaded connections, depending on the modification of vehicle, the designer uses bolts or studs with nuts.



Dimensions tires GAZ 53 Dimensions wheel disks GAZ 53


Possible sizes for all GAZ models of different years of manufacture and modifications
General view spravkaGeneral view wheels Tires spravka
Maximum tire sizes for GAZ

Wheel disks spravka
Possible disk sizes for GAZ of different years of manufacture and modifications

Wheels spravka
Possible wheel sizes for GAZ of different years of manufacture and modifications

Dimensions wheels GAZ 240/50R20 min
(General view)
240/50R20
20x8.5
20''
Table of dimensions of wheels of GAZ 53
Year spravka
Year of production

Dimensions spravka
Tire size in format:

1. Width of work face.

2. Percentage of profile height from width.

3. R is type of construction (radial) - inner diameter (in inches).

spravka
B (mm) spravka
Wheel width:

1. Nominal wheel width (excluding protective belt).

2. Maximum width during operation.

spravka
D (mm) spravka
Wheel diameter:

1. Nominal size of outer diameter (2xR) of the wheel.

2. Maximum size during operation.

spravka
L (mm) spravka
Wheel circumference in (mm)

H (mm) spravka
Wheel profile:

Wheel profile (height) for models of different years of manufacture

spravka
spravka
Wheel revolutions per (km) under standard conditions

GAZ 53
1961240/50R20238-242745-7532366123423
1962240/50R20238-242745-7532366123423
1963240/50R20238-242745-7532366123423
1964240/50R20238-242745-7532366123423
1965240/50R20238-242745-7532366123423
1966240/50R20238-242745-7532366123423
1967240/50R20238-242745-7532366123423
1968240/50R20238-242745-7532366123423
1969240/50R20238-242745-7532366123423
1970240/50R20238-242745-7532366123423
1971240/50R20238-242745-7532366123423
1972240/50R20238-242745-7532366123423
1973240/50R20238-242745-7532366123423
1974240/50R20238-242745-7532366123423
1975240/50R20238-242745-7532366123423
1976240/50R20238-242745-7532366123423
1977240/50R20238-242745-7532366123423
1978240/50R20238-242745-7532366123423
1979240/50R20238-242745-7532366123423
1980240/50R20238-242745-7532366123423
1981240/50R20238-242745-7532366123423
1982240/50R20238-242745-7532366123423
1983240/50R20238-242745-7532366123423
1984240/50R20238-242745-7532366123423
1985240/50R20238-242745-7532366123423
1986240/50R20238-242745-7532366123423
1987240/50R20238-242745-7532366123423
1988240/50R20238-242745-7532366123423
1989240/50R20238-242745-7532366123423
1990240/50R20238-242745-7532366123423
1991240/50R20238-242745-7532366123423
1992240/50R20238-242745-7532366123423
1993240/50R20238-242745-7532366123423

Warning: it should be borne in mind that the data given are the average characteristics of the product during operation. Depending on the load, atmospheric phenomena and the degree of pumping, the wheel parameters can vary. Limit values ​​are presented in the table above.