Wheel sizes of Genesis

Minimum tire size for the entire range of Genesis models is: 225/40R19.

Limit parameters for all models:

  • Tire size: from 225/40R19 to 245/50R18;
  • Disk size: from 17x7.0 to 19x8.5.

Structurally, the vehicle wheel combines a wheel disk and a tire.

Tire marking:

Standard European vehicle tire marking is a symbol code that may look, for example, like this - 175/65R15, where:

  • 175 is width of the work face of the tire;
  • 65 is percentage of profile height of tire width;
  • R15 is type of construction (R - radial) and inner diameter (in inches).

Disc specifications:

Wheel disc is characterized by the following key parameters:

  • Width of rim B (distance between shelves);
  • Disc diameter D (distance is measured by the level of shelves);
  • Wheel offset ET (distance from the axis of symmetry of the disk to the plane of abutment to the hub).
  • Diameter of circumference of the location of mounting holes PCD .

Important: vehicle wheel offset is determined by the formula: ET = A - B/2, where A is distance between the inner plane of the disk and the part in contact with the hub, B is disk width.

Dimensions tires Genesis Dimensions wheel disks Genesis

Possible sizes for all Genesis models of different years of manufacture and modifications
General view spravkaGeneral view wheels Tires max spravka
Maximum tire sizes for Genesis

Wheel disks spravka
Possible disk sizes for Genesis of different years of manufacture and modifications

Wheels spravka
Possible wheel sizes for Genesis of different years of manufacture and modifications

Dimensions wheels Genesis 245/50R18 min
(General view)
General wheel parameters for all Genesis models
Dimensions spravka
Tire size in format:

1. Width of work face.

2. Percentage of profile height from width.

3. R - type of construction (radial) - inner diameter (in inches).

B (mm) spravka
Wheel width:

1. Nominal wheel width (excluding protective belt).

2. Maximum width during operation.

D (mm) spravka
Wheel diameter:

1. Nominal size of outer diameter (2xR) of the wheel.

2. Maximum size during operation.

L (mm) spravka
- Wheel circumference in (mm)

H (mm) spravka
Wheel profile:

Wheel profile (height) for models of different years of manufacture

- Wheel revolutions per (km) under standard conditions

245/45R19 245-253 703-711 2144 110 452.7
245/50R18 245-263 702-713 2114 123 453.3
225/45R18 225-234 660-667 2010 101 482.5
225/40R19 225-239 663-671 2022 90 480.4
225/50R17 225-242 657-668 2007 113 484.7
225/55R17 225-242 679-690 2074 124 468.6
245/45R18 245-253 678-685 2065 110 469.7

Warning: it should be borne in mind that the data given are the average characteristics of the product during operation. Depending on the load, atmospheric phenomena and the degree of pumping, the wheel parameters can vary. Limit values ​​are presented in the table above.