Wheel sizes of GMC Sierra 1500 Limited

Minimum wheel diameter for the entire range of models is: 785-793 (mm).

General characteristics:

  • Wheel width in the standard state without load (B): from 253-257 (mm) to 283-287 (mm);
  • Full diameter (D): from 785-793 (mm) to 811-821 (mm);
  • Circumference (L): from 2478 (mm) to 2561 (mm);
  • Wheel profile, height (H): from 128 (mm) to 186 (mm);
  • Rpm per 1000 (m): from 390 (mm) to 404 (mm).

Possible wheel sizes for GMC model:

  • 255/70R17
  • 265/70R17
  • 265/65R18
  • 275/55R20
  • 285/45R22.

Fastener thread:

In most cases, wheel fastener thread has metric threads with fine pitch (М12х1.25/М12х1.5/М14х1.25/М14х1.5), which must correspond to the threads of thread studs or threaded holes in the wheel hub.

Important: fastening of wheel to the wheel hub is carried out using threaded connections, depending on the modification of vehicle, the designer uses bolts or studs with nuts.



Dimensions tires GMC Sierra 1500 Limited Dimensions wheel disks GMC Sierra 1500 Limited


Table of dimensions of wheels of GMC Sierra 1500 Limited
Year spravka
Year of production

Dimensions spravka
Tire size in format:

1. Width of work face.

2. Percentage of profile height from width.

3. R is type of construction (radial) - inner diameter (in inches).

spravka
B (mm) spravka
Wheel width:

1. Nominal wheel width (excluding protective belt).

2. Maximum width during operation.

spravka
D (mm) spravka
Wheel diameter:

1. Nominal size of outer diameter (2xR) of the wheel.

2. Maximum size during operation.

spravka
L (mm) spravka
Wheel circumference in (mm)

H (mm) spravka
Wheel profile:

Wheel profile (height) for models of different years of manufacture

spravka
spravka
Wheel revolutions per (km) under standard conditions

5.3i
2019255/70R17253-257785-7932478178404
2019265/70R17265-278803-8132522186396.5
2019265/65R18265-278802-8122519172397.1
2019275/55R20275-288811-8212546151392.8
2019285/45R22283-287811-8192561128390

Warning: it should be borne in mind that the data given are the average characteristics of the product during operation. Depending on the load, atmospheric phenomena and the degree of pumping, the wheel parameters can vary. Limit values ​​are presented in the table above.