Wheel sizes of GMC Typhoon

Minimum wheel diameter for the entire range of models is: 651-662 (mm).

General characteristics:

  • Wheel width in the standard state without load (B): from 245-263 (mm) to 255-265 (mm);
  • Full diameter (D): from 651-662 (mm) to 661-672 (mm);
  • Circumference (L): from 1989 (mm) to 2019 (mm);
  • Wheel profile, height (H): from 115 (mm) to 123 (mm);
  • Rpm per 1000 (m): from 481.4 (mm) to 488.7 (mm).

Possible wheel sizes for GMC model:

  • 245/50R16
  • 255/45R17.

Fastener thread:

In most cases, wheel fastener thread has metric threads with fine pitch (М12х1.25/М12х1.5/М14х1.25/М14х1.5), which must correspond to the threads of thread studs or threaded holes in the wheel hub.

Important: fastening of wheel to the wheel hub is carried out using threaded connections, depending on the modification of vehicle, the designer uses bolts or studs with nuts.

Dimensions tires GMC Typhoon Dimensions wheel disks GMC Typhoon

Possible sizes for all GMC models of different years of manufacture and modifications
General view spravkaGeneral view wheels Tires spravka
Maximum tire sizes for GMC

Wheel disks spravka
Possible disk sizes for GMC of different years of manufacture and modifications

Wheels spravka
Possible wheel sizes for GMC of different years of manufacture and modifications

Dimensions wheels GMC 245/50R16 min
(General view)
Table of dimensions of wheels of GMC Typhoon
Year spravka
Year of production

Dimensions spravka
Tire size in format:

1. Width of work face.

2. Percentage of profile height from width.

3. R is type of construction (radial) - inner diameter (in inches).

B (mm) spravka
Wheel width:

1. Nominal wheel width (excluding protective belt).

2. Maximum width during operation.

D (mm) spravka
Wheel diameter:

1. Nominal size of outer diameter (2xR) of the wheel.

2. Maximum size during operation.

L (mm) spravka
Wheel circumference in (mm)

H (mm) spravka
Wheel profile:

Wheel profile (height) for models of different years of manufacture

Wheel revolutions per (km) under standard conditions

4.3T GMT300

Warning: it should be borne in mind that the data given are the average characteristics of the product during operation. Depending on the load, atmospheric phenomena and the degree of pumping, the wheel parameters can vary. Limit values ​​are presented in the table above.