Wheel sizes of Hafei

Minimum tire size for the entire range of Hafei models is: 175/65R14.

Limit parameters for all models:

  • Tire size: from 175/65R14 to 185/65R14;
  • Disk size: from 14x5.5 to 14x6.0.

Structurally, the vehicle wheel combines a wheel disk and a tire.

Tire marking:

Standard European vehicle tire marking is a symbol code that may look, for example, like this - 175/65R15, where:

  • 175 is width of the work face of the tire;
  • 65 is percentage of profile height of tire width;
  • R15 is type of construction (R - radial) and inner diameter (in inches).

Disc specifications:

Wheel disc is characterized by the following key parameters:

  • Width of rim B (distance between shelves);
  • Disc diameter D (distance is measured by the level of shelves);
  • Wheel offset ET (distance from the axis of symmetry of the disk to the plane of abutment to the hub).
  • Diameter of circumference of the location of mounting holes PCD .

Important: vehicle wheel offset is determined by the formula: ET = A - B/2, where A is distance between the inner plane of the disk and the part in contact with the hub, B is disk width.



Dimensions tires Hafei Dimensions wheel disks Hafei


Possible sizes for all Hafei models of different years of manufacture and modifications
General view spravkaGeneral view wheels Tires max spravka
Maximum tire sizes for Hafei

Wheel disks spravka
Possible disk sizes for Hafei of different years of manufacture and modifications

Wheels spravka
Possible wheel sizes for Hafei of different years of manufacture and modifications

Dimensions wheels Hafei 185/65R14 min
(General view)
185/65R14
14x5.5
14x6.0
14''
General wheel parameters for all Hafei models
Dimensions spravka
Tire size in format:

1. Width of work face.

2. Percentage of profile height from width.

3. R - type of construction (radial) - inner diameter (in inches).

spravka
B (mm) spravka
Wheel width:

1. Nominal wheel width (excluding protective belt).

2. Maximum width during operation.

spravka
D (mm) spravka
Wheel diameter:

1. Nominal size of outer diameter (2xR) of the wheel.

2. Maximum size during operation.

spravka
L (mm) spravka
- Wheel circumference in (mm)

H (mm) spravka
Wheel profile:

Wheel profile (height) for models of different years of manufacture

spravka
spravka
- Wheel revolutions per (km) under standard conditions

175/65R14 175-184 583-594 1781 114 545.9
185/65R14 185-197 596-606 1818 120 534

Warning: it should be borne in mind that the data given are the average characteristics of the product during operation. Depending on the load, atmospheric phenomena and the degree of pumping, the wheel parameters can vary. Limit values ​​are presented in the table above.