Wheel sizes of Holden

Minimum tire size for the entire range of Holden models is: 175/65R14.

Limit parameters for all models:

  • Tire size: from 175/65R14 to 245/45R18;
  • Disk size: from 14x5.5 to 20x8.0.

Structurally, the vehicle wheel combines a wheel disk and a tire.

Tire marking:

Standard European vehicle tire marking is a symbol code that may look, for example, like this - 175/65R15, where:

  • 175 is width of the work face of the tire;
  • 65 is percentage of profile height of tire width;
  • R15 is type of construction (R - radial) and inner diameter (in inches).

Disc specifications:

Wheel disc is characterized by the following key parameters:

  • Width of rim B (distance between shelves);
  • Disc diameter D (distance is measured by the level of shelves);
  • Wheel offset ET (distance from the axis of symmetry of the disk to the plane of abutment to the hub).
  • Diameter of circumference of the location of mounting holes PCD .

Important: vehicle wheel offset is determined by the formula: ET = A - B/2, where A is distance between the inner plane of the disk and the part in contact with the hub, B is disk width.



Dimensions tires Holden Dimensions wheel disks Holden

Wheels by models:


General wheel parameters for all Holden models
Dimensions spravka
Tire size in format:

1. Width of work face.

2. Percentage of profile height from width.

3. R - type of construction (radial) - inner diameter (in inches).

spravka
B (mm) spravka
Wheel width:

1. Nominal wheel width (excluding protective belt).

2. Maximum width during operation.

spravka
D (mm) spravka
Wheel diameter:

1. Nominal size of outer diameter (2xR) of the wheel.

2. Maximum size during operation.

spravka
L (mm) spravka
- Wheel circumference in (mm)

H (mm) spravka
Wheel profile:

Wheel profile (height) for models of different years of manufacture

spravka
spravka
- Wheel revolutions per (km) under standard conditions

185/70R14 185-197 615-626 1879 518 517.9
195/60R15 195-209 615-625 1876 117 517.6
205/50R16 205-223 611-620 1867 103 520.7
205/55R16 205-223 632-642 1928 113 503.8
225/45R17 225-234 634-642 1934 101 501.9
225/40R18 225-239 637-645 1943 90 499.6
185/65R15 185-198 622-632 1952 120 512.2
195/55R16 195-209 621-628 1891 107 512.7
215/45R16 215-222 600-608 1830 97 530.6
215/40R17 215-227 604-610 1842 86 527.2
195/65R15 195-209 635-645 1937 127 501.7
205/50R17 205-223 637-646 1946 103 499.9
225/40R17 225-238 612-622 1922 90 520.3
185/75R14 185-198 633-643 1989 139 502.8
205/60R15 205-217 627-637 1912 123 507.7
245/45R18 245-253 678-685 2065 110 469.7
245/40R19 245-258 679-687 2071 98 469.1
235/50R18 235-255 692-703 2114 118 459.9
245/35R20 245-258 680-686 2074 86 468.5
175/70R14 175-184 601-612 1836 123 553.4
175/65R14 175-184 583-594 1781 114 545.9
185/60R15 185-197 603-611 1839 111 527.9
195/60R16 195-208 640-650 2012 117 497.1
205/65R15 205-217 648-657 1973 133 491.6
235/45R17 235-245 643-652 1964 106 494.8
235/40R18 235-251 645-653 1967 94 493.4
205/60R16 205-217 652-662 1989 123 487.9
215/60R16 215-230 664-674 2025 129 479.1
215/50R17 215-235 647-656 1976 108 492.2
215/45R18 215-222 651-659 1986 97 489.2
235/45R18 235-245 669-677 2040 106 476
225/50R17 225-242 657-668 2007 113 484.7

Warning: it should be borne in mind that the data given are the average characteristics of the product during operation. Depending on the load, atmospheric phenomena and the degree of pumping, the wheel parameters can vary. Limit values ​​are presented in the table above.