Wheel sizes of LDV

Minimum tire size for the entire range of LDV models is: 215/70R16.

Limit parameters for all models:

  • Tire size: from 215/70R16 to 265/45R21;
  • Disk size: from 16x6.0 to 19x7.5.

Structurally, the vehicle wheel combines a wheel disk and a tire.

Tire marking:

Standard European vehicle tire marking is a symbol code that may look, for example, like this - 175/65R15, where:

  • 175 is width of the work face of the tire;
  • 65 is percentage of profile height of tire width;
  • R15 is type of construction (R - radial) and inner diameter (in inches).

Disc specifications:

Wheel disc is characterized by the following key parameters:

  • Width of rim B (distance between shelves);
  • Disc diameter D (distance is measured by the level of shelves);
  • Wheel offset ET (distance from the axis of symmetry of the disk to the plane of abutment to the hub).
  • Diameter of circumference of the location of mounting holes PCD .

Important: vehicle wheel offset is determined by the formula: ET = A - B/2, where A is distance between the inner plane of the disk and the part in contact with the hub, B is disk width.

Dimensions tires LDV Dimensions wheel disks LDV

Possible sizes for all LDV models of different years of manufacture and modifications
General view spravkaGeneral view wheels Tires max spravka
Maximum tire sizes for LDV

Wheel disks spravka
Possible disk sizes for LDV of different years of manufacture and modifications

Wheels spravka
Possible wheel sizes for LDV of different years of manufacture and modifications

Dimensions wheels LDV 265/45R21 min
(General view)
General wheel parameters for all LDV models
Dimensions spravka
Tire size in format:

1. Width of work face.

2. Percentage of profile height from width.

3. R - type of construction (radial) - inner diameter (in inches).

B (mm) spravka
Wheel width:

1. Nominal wheel width (excluding protective belt).

2. Maximum width during operation.

D (mm) spravka
Wheel diameter:

1. Nominal size of outer diameter (2xR) of the wheel.

2. Maximum size during operation.

L (mm) spravka
- Wheel circumference in (mm)

H (mm) spravka
Wheel profile:

Wheel profile (height) for models of different years of manufacture

- Wheel revolutions per (km) under standard conditions

245/65R17 245-258 750-760 2357 159 424.3
255/60R18 255-268 763-773 2398 153 417.1
255/55R19 255-268 763-773 2397 140 417.1
265/45R21 265-278 772-782 2425 199 412.4
215/70R16 215-228 707-717 2222 151 450
225/55R18 225-238 705-715 2214 124 451.7
245/70R16 245-258 749-759 2354 172 424.8
215/75R16 215-228 729-739 2290 161 436.7

Warning: it should be borne in mind that the data given are the average characteristics of the product during operation. Depending on the load, atmospheric phenomena and the degree of pumping, the wheel parameters can vary. Limit values ​​are presented in the table above.