Wheel sizes of Lincoln

Minimum tire size for the entire range of Lincoln models is: 205/75R15.

Limit parameters for all models:

  • Tire size: from 205/75R15 to 285/60R18;
  • Disk size: from 15x7.0 to 20x9.0.

Structurally, the vehicle wheel combines a wheel disk and a tire.

Tire marking:

Standard European vehicle tire marking is a symbol code that may look, for example, like this - 175/65R15, where:

  • 175 is width of the work face of the tire;
  • 65 is percentage of profile height of tire width;
  • R15 is type of construction (R - radial) and inner diameter (in inches).

Disc specifications:

Wheel disc is characterized by the following key parameters:

  • Width of rim B (distance between shelves);
  • Disc diameter D (distance is measured by the level of shelves);
  • Wheel offset ET (distance from the axis of symmetry of the disk to the plane of abutment to the hub).
  • Diameter of circumference of the location of mounting holes PCD .

Important: vehicle wheel offset is determined by the formula: ET = A - B/2, where A is distance between the inner plane of the disk and the part in contact with the hub, B is disk width.



Dimensions tires Lincoln Dimensions wheel disks Lincoln


General wheel parameters for all Lincoln models
Dimensions spravka
Tire size in format:

1. Width of work face.

2. Percentage of profile height from width.

3. R - type of construction (radial) - inner diameter (in inches).

spravka
B (mm) spravka
Wheel width:

1. Nominal wheel width (excluding protective belt).

2. Maximum width during operation.

spravka
D (mm) spravka
Wheel diameter:

1. Nominal size of outer diameter (2xR) of the wheel.

2. Maximum size during operation.

spravka
L (mm) spravka
- Wheel circumference in (mm)

H (mm) spravka
Wheel profile:

Wheel profile (height) for models of different years of manufacture

spravka
spravka
- Wheel revolutions per (km) under standard conditions

245/65R17 245-258 750-760 2357 159 424.3
255/60R17 255-268 738-748 2318 153 431.5
255/45R19 255-268 712-722 2237 115 447
245/40R20 245-258 704-712 2147 98 452.2
235/50R18 235-255 692-703 2114 118 459.9
225/75R15 225-238 719-729 2257 169 443
225/60R16 225-237 676-686 2062 135 470.6
235/75R15 235-248 734-744 2304 176 434
205/75R15 205-218 689-699 2163 154 462.3
235/50R17 235-255 667-678 2037 118 477.4
245/45R17 245-253 652-660 1989 110 488
215/60R16 215-230 664-674 2025 129 479.1
235/45R19 235-248 694-704 2181 106 458.6
245/45R19 245-253 703-711 2144 110 452.7
255/40R20 255-268 712-722 2237 102 447.1
235/55R18 235-248 716-726 2248 129 444.8
255/45R20 255-268 738-748 2317 115 431.6
245/60R18 245-258 751-761 2360 147 423.8
225/50R17 225-242 657-668 2007 113 484.7
255/75R17 255-268 814-824 2558 191 390.9
275/65R18 275-288 815-825 2559 179 390.7
285/60R18 285-298 799-809 2511 171 398.3
255/70R18 255-268 814-824 2558 178 391
225/60R17 225-237 702-712 2141 135 453.6
235/65R17 235-250 737-750 2251 153 431.7

Warning: it should be borne in mind that the data given are the average characteristics of the product during operation. Depending on the load, atmospheric phenomena and the degree of pumping, the wheel parameters can vary. Limit values ​​are presented in the table above.