Wheel sizes of Rolls-Royce

Minimum tire size for the entire range of Rolls-Royce models is: 235/65R16.

Limit parameters for all models:

  • Tire size: from 235/65R16 to 285/45R21;
  • Disk size: from 16x7.0 to 22x8.5.

Structurally, the vehicle wheel combines a wheel disk and a tire.

Tire marking:

Standard European vehicle tire marking is a symbol code that may look, for example, like this - 175/65R15, where:

  • 175 is width of the work face of the tire;
  • 65 is percentage of profile height of tire width;
  • R15 is type of construction (R - radial) and inner diameter (in inches).

Disc specifications:

Wheel disc is characterized by the following key parameters:

  • Width of rim B (distance between shelves);
  • Disc diameter D (distance is measured by the level of shelves);
  • Wheel offset ET (distance from the axis of symmetry of the disk to the plane of abutment to the hub).
  • Diameter of circumference of the location of mounting holes PCD .

Important: vehicle wheel offset is determined by the formula: ET = A - B/2, where A is distance between the inner plane of the disk and the part in contact with the hub, B is disk width.

Dimensions tires Rolls-Royce Dimensions wheel disks Rolls-Royce

Possible sizes for all Rolls-Royce models of different years of manufacture and modifications
General view spravkaGeneral view wheels Tires max spravka
Maximum tire sizes for Rolls-Royce

Wheel disks spravka
Possible disk sizes for Rolls-Royce of different years of manufacture and modifications

Wheels spravka
Possible wheel sizes for Rolls-Royce of different years of manufacture and modifications

Dimensions wheels Rolls-Royce 285/45R21 min
(General view)
General wheel parameters for all Rolls-Royce models
Dimensions spravka
Tire size in format:

1. Width of work face.

2. Percentage of profile height from width.

3. R - type of construction (radial) - inner diameter (in inches).

B (mm) spravka
Wheel width:

1. Nominal wheel width (excluding protective belt).

2. Maximum width during operation.

D (mm) spravka
Wheel diameter:

1. Nominal size of outer diameter (2xR) of the wheel.

2. Maximum size during operation.

L (mm) spravka
- Wheel circumference in (mm)

H (mm) spravka
Wheel profile:

Wheel profile (height) for models of different years of manufacture

- Wheel revolutions per (km) under standard conditions

235/65R16 235-248 712-722 2236 153 447.1
255/50R19 255-268 738-748 2317 128 431.6
255/50R21 255-268 788-798 2477 128 403.8
285/45R21 285-298 790-800 2482 128 403
255/45R20 255-268 738-748 2317 115 431.6
255/40R21 253-257 733-741 2317 102 432
255/45R22 253-257 784-792 2477 115 404

Warning: it should be borne in mind that the data given are the average characteristics of the product during operation. Depending on the load, atmospheric phenomena and the degree of pumping, the wheel parameters can vary. Limit values ​​are presented in the table above.