Wheel sizes of Venucia

Minimum tire size for the entire range of Venucia models is: 165/70R14.

Limit parameters for all models:

  • Tire size: from 165/70R14 to 225/45R17;
  • Disk size: from 14x5.0 to 18x7.5.

Structurally, the vehicle wheel combines a wheel disk and a tire.

Tire marking:

Standard European vehicle tire marking is a symbol code that may look, for example, like this - 175/65R15, where:

  • 175 is width of the work face of the tire;
  • 65 is percentage of profile height of tire width;
  • R15 is type of construction (R - radial) and inner diameter (in inches).

Disc specifications:

Wheel disc is characterized by the following key parameters:

  • Width of rim B (distance between shelves);
  • Disc diameter D (distance is measured by the level of shelves);
  • Wheel offset ET (distance from the axis of symmetry of the disk to the plane of abutment to the hub).
  • Diameter of circumference of the location of mounting holes PCD .

Important: vehicle wheel offset is determined by the formula: ET = A - B/2, where A is distance between the inner plane of the disk and the part in contact with the hub, B is disk width.

Dimensions tires Venucia Dimensions wheel disks Venucia

Possible sizes for all Venucia models of different years of manufacture and modifications
General view spravkaGeneral view wheels Tires max spravka
Maximum tire sizes for Venucia

Wheel disks spravka
Possible disk sizes for Venucia of different years of manufacture and modifications

Wheels spravka
Possible wheel sizes for Venucia of different years of manufacture and modifications

Dimensions wheels Venucia 225/45R17 min
(General view)
General wheel parameters for all Venucia models
Dimensions spravka
Tire size in format:

1. Width of work face.

2. Percentage of profile height from width.

3. R - type of construction (radial) - inner diameter (in inches).

B (mm) spravka
Wheel width:

1. Nominal wheel width (excluding protective belt).

2. Maximum width during operation.

D (mm) spravka
Wheel diameter:

1. Nominal size of outer diameter (2xR) of the wheel.

2. Maximum size during operation.

L (mm) spravka
- Wheel circumference in (mm)

H (mm) spravka
Wheel profile:

Wheel profile (height) for models of different years of manufacture

- Wheel revolutions per (km) under standard conditions

185/65R15 185-198 622-632 1952 120 512.2
205/55R16 205-223 632-642 1928 113 503.8
225/45R17 225-234 634-642 1934 101 501.9
215/45R17 215-222 625-634 1909 97 509.1
215/40R18 215-228 629-639 1977 86 505.9
165/70R14 165-177 587-598 1793 116 567.2
175/60R15 175-184 591-599 1803 105 538.6
195/45R16 195-203 582-590 1775 88 547
215/65R16 215-230 686-698 2092 140 464.1
215/60R17 215-228 690-700 2167 129 461.5

Warning: it should be borne in mind that the data given are the average characteristics of the product during operation. Depending on the load, atmospheric phenomena and the degree of pumping, the wheel parameters can vary. Limit values ​​are presented in the table above.