Wheel sizes of Vortex

Minimum tire size for the entire range of Vortex models is: 185/60R14.

Limit parameters for all models:

  • Tire size: from 185/60R14 to 235/60R16;
  • Disk size: from 14x6.0 to 16x7.0.

Structurally, the vehicle wheel combines a wheel disk and a tire.

Tire marking:

Standard European vehicle tire marking is a symbol code that may look, for example, like this - 175/65R15, where:

  • 175 is width of the work face of the tire;
  • 65 is percentage of profile height of tire width;
  • R15 is type of construction (R - radial) and inner diameter (in inches).

Disc specifications:

Wheel disc is characterized by the following key parameters:

  • Width of rim B (distance between shelves);
  • Disc diameter D (distance is measured by the level of shelves);
  • Wheel offset ET (distance from the axis of symmetry of the disk to the plane of abutment to the hub).
  • Diameter of circumference of the location of mounting holes PCD .

Important: vehicle wheel offset is determined by the formula: ET = A - B/2, where A is distance between the inner plane of the disk and the part in contact with the hub, B is disk width.

Dimensions tires Vortex Dimensions wheel disks Vortex

Possible sizes for all Vortex models of different years of manufacture and modifications
General view spravkaGeneral view wheels Tires max spravka
Maximum tire sizes for Vortex

Wheel disks spravka
Possible disk sizes for Vortex of different years of manufacture and modifications

Wheels spravka
Possible wheel sizes for Vortex of different years of manufacture and modifications

Dimensions wheels Vortex 235/60R16 min
(General view)
General wheel parameters for all Vortex models
Dimensions spravka
Tire size in format:

1. Width of work face.

2. Percentage of profile height from width.

3. R - type of construction (radial) - inner diameter (in inches).

B (mm) spravka
Wheel width:

1. Nominal wheel width (excluding protective belt).

2. Maximum width during operation.

D (mm) spravka
Wheel diameter:

1. Nominal size of outer diameter (2xR) of the wheel.

2. Maximum size during operation.

L (mm) spravka
- Wheel circumference in (mm)

H (mm) spravka
Wheel profile:

Wheel profile (height) for models of different years of manufacture

- Wheel revolutions per (km) under standard conditions

185/60R14 185-197 578-586 1763 111 551.1
195/55R15 195-209 596-603 1815 107 534.6
215/70R16 215-228 707-717 2222 151 450
235/60R16 235-250 688-700 2098 141 462.4

Warning: it should be borne in mind that the data given are the average characteristics of the product during operation. Depending on the load, atmospheric phenomena and the degree of pumping, the wheel parameters can vary. Limit values ​​are presented in the table above.