Wheel sizes of ZX

Minimum tire size for the entire range of ZX models is: 205/80R14.

Limit parameters for all models:

  • Tire size: from 205/80R14 to 235/70R16;
  • Disk size: from 14x6.0 to 16x7.0.

Structurally, the vehicle wheel combines a wheel disk and a tire.

Tire marking:

Standard European vehicle tire marking is a symbol code that may look, for example, like this - 175/65R15, where:

  • 175 is width of the work face of the tire;
  • 65 is percentage of profile height of tire width;
  • R15 is type of construction (R - radial) and inner diameter (in inches).

Disc specifications:

Wheel disc is characterized by the following key parameters:

  • Width of rim B (distance between shelves);
  • Disc diameter D (distance is measured by the level of shelves);
  • Wheel offset ET (distance from the axis of symmetry of the disk to the plane of abutment to the hub).
  • Diameter of circumference of the location of mounting holes PCD .

Important: vehicle wheel offset is determined by the formula: ET = A - B/2, where A is distance between the inner plane of the disk and the part in contact with the hub, B is disk width.

Dimensions tires ZX Dimensions wheel disks ZX

Possible sizes for all ZX models of different years of manufacture and modifications
General view spravkaGeneral view wheels Tires max spravka
Maximum tire sizes for ZX

Wheel disks spravka
Possible disk sizes for ZX of different years of manufacture and modifications

Wheels spravka
Possible wheel sizes for ZX of different years of manufacture and modifications

Dimensions wheels ZX 235/70R16 min
(General view)
General wheel parameters for all ZX models
Dimensions spravka
Tire size in format:

1. Width of work face.

2. Percentage of profile height from width.

3. R - type of construction (radial) - inner diameter (in inches).

B (mm) spravka
Wheel width:

1. Nominal wheel width (excluding protective belt).

2. Maximum width during operation.

D (mm) spravka
Wheel diameter:

1. Nominal size of outer diameter (2xR) of the wheel.

2. Maximum size during operation.

L (mm) spravka
- Wheel circumference in (mm)

H (mm) spravka
Wheel profile:

Wheel profile (height) for models of different years of manufacture

- Wheel revolutions per (km) under standard conditions

225/75R16 225-240 744-755 2337 169 427.9
205/80R14 205-218 684-694 2148 164 465.7
235/70R16 235-248 735-745 2310 165 432.9

Warning: it should be borne in mind that the data given are the average characteristics of the product during operation. Depending on the load, atmospheric phenomena and the degree of pumping, the wheel parameters can vary. Limit values ​​are presented in the table above.